Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Lauderdale Lakes
Window replacement in Lauderdale Lakes runs $680-$1,400 per opening for impact-rated units, with full-frame work on CBS condo buildings typically landing between $1,100 and $1,400 when buck framing and stucco repair are needed. Most Lauderdale Lakes jobs require custom sizing because the city’s 1960s-1970s garden-condo stock was framed for jalousie and thin aluminum sliders, not modern impact frames. Call (754) 812-9260 to schedule your free measured survey - the written quote you receive is the same document we build from.
We’re the Window Replacement team at Sightline Windows & Doors, and we’ve been measuring openings and writing prices before work starts since 2012. Our crews serve Lauderdale Lakes from our Miami office, and we know the local building stock: the two- and three-story CBS garden condos off Oakland Park Boulevard, the stucco-clad blocks along State Road 7, the mid-century apartment complexes near the Swap Shop. Every one of them shares the same problem - original windows that predate Broward County’s HVHZ requirements by decades.
The salt air here is real. It carries inland from the Intracoastal, and it eats standard aluminum hardware and non-marine finishes faster than you’d expect. We specify stainless steel fasteners, hot-dip galvanized buck framing, and marine-grade powder coats on every Lauderdale Lakes job because we’ve seen what the cheap inland spec looks like after five years: pitted frames, failed seals, stucco cracks around forced-fit jambs. The coastal-spec job costs more upfront. It costs far less over the life of the window.
Why Sightline Windows & Doors Weston Is Lauderdale Lakes’s Preferred Window Replacement Company
We’ve completed thousands of openings across Broward County since 2012, and Lauderdale Lakes represents one of the most concentrated markets we serve - not because the buildings are new, but because they aren’t. The city’s enormous backlog of non-compliant jalousie and single-pane aluminum windows means we measure, quote, and install here weekly. Our Window Replacement in Lauderdale Lakes work is governed by the same Haven Standard that covers every one of the 18,000+ openings in our record: written price before any work starts, verified crew, documented photo evidence when the job finishes.
Our technicians are background-checked, uniformed, and identified by license number before arrival - Haven Clause 3. The measured survey you keep, the written scope you sign, and the final invoice are the same document - Haven Clause 1. If anything’s not done right, we make it right under our 365-Day Done Right Promise, written into every job, not offered as a courtesy. And if you have a competitor’s written estimate, we’ll review it free - our Second Opinion service.
Calls are answered by a live person, 24/7. Not a queue. Not a callback window. (754) 812-9260.
Our Window Replacement Services in Lauderdale Lakes

Full Frame Replacement
Full frame replacement is what most Lauderdale Lakes buildings actually need. The original jalousie rough openings are too shallow and too narrow for modern impact-rated frames. We remove the entire existing frame down to the block, install buck framing to bring the opening to current dimensions, set the impact unit with proper anchoring into the CBS wall, and stucco-patch back to the wall plane. This is the only method that achieves both a code-compliant fit and the design-pressure ratings Broward’s HVHZ demands. A typical full-frame replacement in Lauderdale Lakes runs $1,100-$1,400 per opening, including buck framing and stucco repair.

Insert Window Replacement
Insert replacement is rare in Lauderdale Lakes’s older stock, but possible where a previous replacement left a sound, properly sized frame in good condition. The existing frame must be square, structurally intact, and capable of accepting a new sash and glazing unit without compromising the impact rating. We don’t force inserts into undersized openings - Haven Clause 5, no surprises. When an insert is viable, it runs $680-$920 per opening. We’ll tell you honestly during the measured survey whether your building qualifies.

Vinyl Replacement Windows
Vinyl frames in Lauderdale Lakes must be specified with marine-grade finishes and stainless or hot-dip hardware, not the standard inland spec. The salt air from the Intracoastal oxidizes cheap hardware and breaks down standard powder coats. We source vinyl lines from ECO Window Systems and ViewLux with coastal-rated formulations, and we document the hardware specification on your written scope. Vinyl replacement in Lauderdale Lakes typically falls between $780 and $1,150 per opening, depending on impact rating and custom sizing needs.

Energy-Efficient Upgrade
Energy-efficient upgrades in Lauderdale Lakes start with the right glazing spec for the climate: low-E coatings tuned for high solar heat gain coefficient (SHGC) blocking, warm-edge spacers, and argon fill. But the frame and installation matter as much as the glass. A forced-fit unit with air-leaking jambs negates the best glazing spec. Our energy-efficient installations include proper buck framing, sealed perimeters, and documented blower-door testing where the association requires it. Expect $890-$1,280 per opening for a complete energy-efficient upgrade with impact-rated laminated glass.

Window Maintenance & Care
Maintenance on Lauderdale Lakes’s older aluminum and jalousie systems is usually diagnostic - we document what’s failing, what’s repairable, and what requires replacement under current code. We don’t perform band-aid repairs on non-compliant openings because they won’t pass Broward County permit review. The measured survey includes frame readings, sightline measurements, and a written assessment you can use for association budgeting or recertification planning.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Lauderdale Lakes
We specify from eight manufacturer lines, chosen by what the opening requires, not by what we have in stock. For Lauderdale Lakes’s HVHZ requirements, we regularly install PGT and CGI impact-rated units with Miami-Dade NOAs, ECO Window Systems vinyl with coastal-grade finishes, and Therma-Tru door systems and Sliding & Patio Doors - Lauderdale Lakes where the opening includes a terrace or patio door. We don’t list-dump brands - we name the one that matches your building’s pressure rating, your association’s aesthetic requirements, and your budget tier, and we put it in writing on the scope before any work starts.
Common Window Replacement Problems We See in Lauderdale Lakes Homes

- Jalousie rough openings that won’t accept modern impact frames. The original 1960s-70s openings were sized for thin jalousie blades and minimal framing. Modern impact units need deeper jambs and wider rough openings. Crews that skip buck framing to save money end up with air-leaking perimeters and stucco cracks that fail inspection.
- Salt-air oxidation of 1970s aluminum frames and hardware. The Intracoastal air carries corrosive salt inland year-round, and Lauderdale Lakes’s humidity never drops low enough to let frames dry out. We see anodized aluminum pitted through, jalousie brackets pulling out of block, and insulated glass seals broken down long before the glass itself fails.
- Condos flagged during Broward’s 40-year structural recertification. Post-Surfside legislation accelerated recertification timelines, and inspectors are routinely citing original window arrays as structural vulnerabilities. Associations that deferred window replacement for decades are now facing full-envelope projects with no budget reserves - and cheap non-HVHZ units fail review outright.
- Forced-fit replacements that leak and crack within two years. The combination of undersized original openings and strict HVHZ pressure requirements creates a temptation to force standard-size units in. We measure twice, fabricate custom, and buck-frame where needed. The alternative costs more to fix than to do right the first time.
Pricing for Window Replacement in Lauderdale Lakes, FL
Here’s what window replacement costs in Lauderdale Lakes’s market, based on the actual measured surveys we’ve written since 2012:
| Service Type | Price Range per Opening |
|---|---|
| Insert Replacement (where viable) | $680 - $920 |
| Vinyl Replacement with coastal-grade finish | $780 - $1,150 |
| Energy-Efficient Upgrade with impact-rated glazing | $890 - $1,280 |
| Full Frame Replacement with buck framing and stucco repair | $1,100 - $1,400 |
| Custom geometric or oversized impact unit | $1,250 - $1,850 |
What moves the number: the condition of the existing frame, whether buck framing is required, the impact rating (large-missile vs. small-missile), the glazing spec, and whether stucco repair is needed to return the wall plane. Every price is written before work starts - Haven Clause 1 - and the quote you sign is the invoice you pay. No change orders. Call (754) 812-9260 for your free measured survey and written estimate.
We Also Serve Cities Near Lauderdale Lakes

Our crews work across Broward County from our Miami office, including Lauderdale Lakes, Weston, Southwest Ranches, Pembroke Pines, and Davie. Each city has its own building stock and code history - we don’t copy-paste surveys between them. Whether you’re in a Weston estate home with custom geometric openings or a Davie ranch house with 1980s aluminum sliders, the measured survey and written price work the same way.
Serving Lauderdale Lakes, FL - Our Local Coverage Area
We’re based in the Lauderdale Lakes area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Lauderdale Lakes

You can’t, because the original rough openings are too shallow and too narrow for modern impact-rated frames, and forcing a unit in skips the buck framing that carries the wind load into the CBS wall. We recently finished a full building-envelope replacement at a three-story CBS garden condo off Oakland Park Boulevard, where we had to buck-frame every opening, set PGT impact units with laminated glass interlayer, and stucco-patch back to the wall plane. The jalousie brackets were pulling out of the block and the aluminum frames had pitted through the anodizing. Every unit now carries a Miami-Dade NOA, and the association used it for its recertification file. Call (754) 812-9260 and we’ll measure your specific openings.
Yes. Broward County falls entirely within Florida’s High-Velocity Hurricane Zone, the most demanding wind-load jurisdiction in the U.S. Every replacement window or door must carry a Miami-Dade NOA or Florida Product Approval, and every installation must be permitted through Broward County’s review. Non-compliant units fail inspection, fail recertification, and void your association’s wind mitigation documentation. We specify only NOA-carrying products and pull permits on every job - it’s documented on your written scope. Call (754) 812-9260 for a free review of what your building needs.
Salt air from the Intracoastal, year-round humidity, and intense UV attack simultaneously. The aluminum frames ubiquitous in Lauderdale Lakes’s stock weren’t specified with marine-grade finishes or stainless hardware. The anodizing pits, the seals on insulated glass units break down, and the hardware corrodes until operation becomes difficult or the sash won’t lock. We’ve measured openings where the frame readings showed 40% more air leakage than the unit was rated for, not because the glass failed, but because the perimeter seal and frame integrity were gone. The fix is coastal-spec materials, not a repeat of the original inland spec. Call (754) 812-9260 for a measured survey that documents exactly what’s failing on your openings.
Yes, if the installation is tight. Impact-rated laminated glass with low-E coating and proper framing blocks more solar heat gain than the single-pane jalousie or old aluminum sliders common here. But the installation method matters as much as the glass spec - forced-fit units with air-leaking jambs lose the efficiency advantage. Our installations include proper buck framing, sealed perimeters, and documented performance. Individual results vary by building orientation and existing insulation, but we write the U-factor and SHGC ratings on your scope so you know what you’re getting. Call (754) 812-9260 for an estimate that names the numbers.
Impact windows are frequently flagged as a required repair during Broward County’s 40-year structural recertification, accelerated by post-Surfside state legislation. Inspectors cite original jalousie arrays as wind-load vulnerabilities, and the recertification file must document code-compliant openings. We install Miami-Dade NOA-carrying units, pull permits, and provide the documented photo record your engineer or association needs for the recertification submission. The association can use our documentation to demonstrate wind mitigation compliance. We’ve completed full-envelope replacements specifically for this purpose - call (754) 812-9260 to schedule a survey and review your recertification timeline.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Lauderdale Lakes since 2012 under the Haven Standard.










Before
After
Before
After
Before
After