Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Sunrise
Window replacement in Sunrise, FL typically runs $650-$2,400 per opening depending on frame type, glass specification, and whether the job requires full-frame removal or insert replacement. Most Sunrise homes built during the 1970s and 1980s need full-frame work to address decades of aluminum-frame degradation and to meet current High Velocity Hurricane Zone codes. Our crews coordinate dispatch from our Miami office and carry the full Miami-Dade NOA documentation required for every permitted replacement in Broward County.
We know Sunrise’s housing stock intimately: the CBS single-family homes off Oakland Park Boulevard, the sprawling condo phases of Sunrise Lakes, and the townhouse clusters near Sawgrass Mills. If you’re in a 55+ community planning to age in place, or a homeowner watching energy bills climb as original single-pane windows fail, we measure once and quote in writing before any work starts. Call (754) 812-9260 to schedule your free estimate.
Why Sightline Windows & Doors Weston Is Sunrise’s Preferred Window Replacement Company
We’ve completed thousands of installations across Broward County since 2012, and Sunrise’s specific combination of aging housing stock, HVHZ compliance requirements, and large HOA-governed communities creates a replacement environment that out-of-area contractors routinely mishandle. Our Window Replacement team carries the full documentation set - Miami-Dade NOAs, Florida Product Approvals, and manufacturer spec sheets - on every Sunrise visit.
Sunrise customers find us through three-star reviews that mention specifics: the written quote that matched the final invoice, the photo record showing before-and-after frame conditions, the technician who arrived with a license number and uniform. Our 365-Day Done Right Promise is stamped on every job, not offered as a courtesy. Live phone coverage means you reach a person, not a queue, when you call (754) 812-9260.
Response time to Sunrise averages same-week scheduling for measured surveys, with installation typically following two to three weeks after quote acceptance - though Sunrise Lakes and similar HOA communities require additional architectural review sequencing that can extend lead times. We build that timeline into our written scope so you’re not surprised.
Our Window Replacement Services in Sunrise
Full Frame Replacement
Full frame replacement removes the entire window unit - frame, sash, and trim - down to the rough opening. In Sunrise’s 1970s-1980s CBS homes, this is usually necessary. The original aluminum frames have endured fifty years of South Florida UV, humidity, and salt-laden air even twelve miles inland. Glazing seals harden. Frames warp. We measure the rough opening, specify the new unit’s design pressure rating for HVHZ compliance, and install a complete system with integrated flashing and proper air sealing. A typical full-frame replacement in Sunrise runs $1,200-$2,400 per opening.
Insert Window Replacement
Insert replacement fits a new window into the existing frame, preserving exterior trim and interior finishes. This works only when the original frame is square, structurally sound, and free of water intrusion - rare in Sunrise’s older stock but occasionally found in 1990s-era additions or well-maintained condo phases. When conditions allow, insert replacement cuts cost and disruption significantly. A typical insert replacement in Sunrise runs $650-$1,400 per opening. We never recommend inserts on degraded aluminum frames; the new sash will fail prematurely on a warped subframe.
Vinyl Replacement Windows
Vinyl frames resist UV degradation and require no painting, a practical consideration for seasonal Sunrise residents who lock up their condo for summer months. We specify vinyl from CWS and ECO Window Systems with multi-chamber construction and reinforced sashes rated for HVHZ wind loads. Vinyl’s thermal performance - lower U-factor and better condensation resistance than aluminum - directly addresses the cooling-load penalty of single-pane originals. A typical vinyl full-frame replacement in Sunrise runs $900-$1,800 per opening.
Energy-Efficient Upgrade
Energy-efficient upgrades in Sunrise target the specific heat-gain profile of inland South Florida: high solar heat gain coefficient (SHGC) blocking, low-E coatings tuned for cooling-dominated climates, and insulated glass units with argon fill. We replaced a failed aluminum jalousie unit in a CBS home in Sunrise Lakes with a PGT impact-rated slider using laminated glass interlayer and a low-E insulated glass unit, then blocked the opening for a future grab bar as part of the client’s aging-in-place plan. The association required us to submit the NOA and have the trim color approved by architectural review before ordering - a sequencing step that added about three weeks. The new impact-rated glazing and Low-E glass are set to cut her cooling costs by 20-30 percent while meeting HVHZ design pressure requirements. Typical energy-efficient upgrades in Sunrise run $1,100-$2,200 per opening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Sunrise
We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - matched to the opening’s performance requirements, not our inventory. For Sunrise’s HVHZ environment, we stock CWS and ES Windows impact-rated vinyl and aluminum systems with current NOAs, enabling faster turnaround on standard sizes. Mr-Glass laminated interlayers meet the large-missile impact requirements for first-floor and vulnerable openings. Every brand is specified by U-factor, SHGC, design pressure, and visible transmittance - the numbers that determine whether your cooling bill drops and whether the inspector signs off.
Common Window Replacement Problems We See in Sunrise Homes
- Seal failure in original aluminum frames. The relentless UV and humidity in Sunrise degrade glazing seals faster than almost anywhere in the continental US. We regularly find fogged insulated glass units and hardened butyl tape in 1970s-era homes near Nob Hill Road - the seal has simply cooked out after decades of thermal cycling.
- Non-impact glass in permitted replacements. Using non-impact glass in a permitted replacement is illegal in the HVHZ and will fail final inspection or trigger insurance rejection. We still encounter this on jobs where a handyman or out-of-state contractor substituted standard glazing. The fix is complete removal and reinstallation with approved product.
- HOA architectural review delays. Contractors working Sunrise Lakes and similar large HOA-governed condo phases quickly discover a double compliance hurdle: a window must first pass HVHZ product approval, then clear the association’s architectural review for frame color, profile depth, and sightline uniformity to preserve building-wide façade consistency - a permit-plus-HOA sequencing problem that routinely blindsides out-of-area companies and adds weeks to project timelines.
- Re-used original aluminum frames on 1970s-1980s CBS homes. UV and humidity have already degraded glazing seals and caused chronic warping that ruins new sashes. We measure frame squareness with digital levels; anything beyond 1/8 inch out of square gets full-frame recommendation, documented in the photo record you receive.
Pricing for Window Replacement in Sunrise, FL
| Service Type | Typical Range per Opening |
|---|---|
| Insert Window Replacement | $650 - $1,400 |
| Vinyl Full-Frame Replacement | $900 - $1,800 |
| Energy-Efficient Full-Frame Upgrade | $1,100 - $2,200 |
| Full Frame Replacement (impact-rated, HVHZ) | $1,200 - $2,400 |
| Custom or geometric shapes | $1,800 - $3,500+ |
What moves a Sunrise job toward the top of these ranges: HVHZ impact-rated glass with large-missile certification, custom sizing for non-standard 1970s openings, HOA-required color matching from premium finish lines, and aging-in-place modifications like blocking for grab bars or zero-threshold sill details. What keeps costs controlled: standard sizes, insert-compatible existing frames, and straightforward vinyl systems from our stocked lines. The written quote you receive before any work starts is the final price - Haven Clause 1. No change orders, no surprises. Call (754) 812-9260 for your free measured survey and written estimate.
We Also Serve Cities Near Sunrise
Our crews work throughout central and western Broward County. We regularly complete Window Replacement in Sunrise and neighboring communities including Weston, Southwest Ranches, Pembroke Pines, and Davie - each with its own permit office, inspection schedule, and HOA landscape. The same Haven Standard governs every opening: written price first, verified crew, documented photo record, 365-Day Done Right Promise.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Sunrise
Yes. Every window replacement in Sunrise requires a Broward County building permit because the city falls within the High Velocity Hurricane Zone. The permit application must include the Miami-Dade NOA or Florida Product Approval for each product line used. We pull permits as standard practice on every job, include the permit cost in your written quote, and schedule inspections so you don’t coordinate with the county. Call (754) 812-9260 to schedule your free estimate - we’ll verify permit requirements for your specific property during the measured survey.
Yes, but the window must clear two hurdles: HVHZ product approval and the association’s architectural review board. We handle both sequences - submitting the NOA, spec sheets, and color samples to the HOA before ordering, so the product that arrives matches what the board approved. The sequencing adds time, typically two to three weeks, but prevents the rework that blindsides contractors who skip this step. Call (754) 812-9260 and we’ll review your association’s specific requirements during our free estimate.
Yes, typically 20-30 percent when replacing single-pane aluminum originals with impact-rated, low-E insulated glass units. The savings come from three mechanisms: reduced solar heat gain (lower SHGC), reduced air infiltration through modern weatherstripping, and the insulating airspace between glass lites. In Sunrise’s climate, cooling dominates energy use eleven months of the year; the payback period on efficient glazing often falls under seven years. Call (754) 812-9260 for a written estimate that specifies the exact U-factor and SHGC of the products we’re proposing.
Full-frame removes everything down to the rough opening; insert preserves the existing frame and installs a new sash. For most 1970s Sunrise CBS homes, full-frame is necessary because the original aluminum frames are warped, seal-degraded, and out of square from decades of UV and humidity exposure. Inserts only work when the existing frame is structurally sound and within 1/8 inch of square - uncommon in this vintage. We measure with digital levels and document the condition in your photo record before recommending either approach. Call (754) 812-9260 for a free assessment of your specific frames.
Aging-in-place modifications focus on maintaining accessibility within your existing footprint. For windows, this means lower sill heights for seated viewing, operable hardware that doesn’t require grip strength, and blocking in the wall cavity for future grab bars near patio door transitions. For doors, we specify zero-threshold or low-profile sills to eliminate trip hazards. These details are planned during the measured survey and written into the scope before ordering - no retrofits, no surprises. Call (754) 812-9260 to discuss how aging-in-place features integrate with your window replacement project.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012 under the Haven Standard.