Custom Window & Door Order Cost - Free In-Home Measure, Written Price

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

How Much Does Custom Window & Door Order Cost in Weston?

Custom window and door orders in Weston, FL typically run between $850 and $6,500 per unit, depending on size, glazing type, frame material, and whether the opening requires impact-rated glass under Broward County code. Most Weston homeowners ordering a full set of custom impact windows for a 2,000-square-foot home budget between $12,000 and $38,000 installed, with custom entry door systems ranging from $3,200 to $9,800 installed. At Sightline Windows & Doors, every price is written before any work starts – Haven Clause 1 is not a policy we describe; it’s the only way we operate.

Custom Window & Door Order Cost Breakdown (2026)

The figures below reflect what Sightline Windows & Doors is quoting for custom orders in the Weston market as of early 2026. These are installed prices – labor, permits, disposal of the old unit, and the documented photo record are included. The measured survey the customer keeps is the same document as the final invoice; there is no separate line for “site visit.”

What Pushes Costs Higher or Lower

Frame material is the first split. Aluminum frames – the dominant choice in Weston because of Florida’s humidity and salt-air proximity to the Everglades – run about 15-25% less than fiberglass equivalents. Fiberglass holds paint better over time and has a lower U-factor (the measure of heat transfer through the frame itself), which matters in Weston’s west-facing exposures along Bonaventure and The Ridges where afternoon sun loads are aggressive.

Glass specification is the second driver. Florida Building Code requires impact-rated glazing on all openings in Broward County’s wind-borne debris zone – Weston sits entirely within that zone. The baseline is a laminated glass unit with a PVB interlayer. Upgrading to a high-performance low-E coating with a solar heat gain coefficient (SHGC) below 0.25 adds roughly $80-$160 per window but can reduce cooling loads enough to qualify for FPL rebates. We’ll note whether your opening qualifies on the written survey.

Opening complexity is the third variable. A straightforward replacement in a standard rough opening takes one crew and roughly 90 minutes. A custom arched or radius window in one of Weston’s older Mediterranean-style homes – particularly those built in the early 2000s in Sectors 4 and 5 – often requires masonry cutting and a custom buck, adding $200-$600 per opening in labor. We measure for this specifically during the survey and document it in writing before the order is placed.

What Affects Custom Window & Door Pricing in Weston

• Broward County permit requirements: Every structural opening replacement in Weston requires a permit pulled through the City of Weston’s building department. Permit fees for a typical residential window or door project run $180-$420 depending on the number of openings and declared job value. Sightline pulls and files the permit; the cost is itemized on your written quote, never buried.
• Impact rating and glass specification: Weston falls within Broward’s High-Velocity Hurricane Zone (HVHZ) boundary. All products we install here carry a Miami-Dade Notice of Acceptance (NOA) or Florida Product Approval number. Ordering non-compliant glass – which some out-of-area vendors do – creates an inspection failure that can delay your certificate of completion by weeks. We specify the NOA on the quote document.
• Custom versus stock sizing: Stock window sizes from a regional distributor carry lead times of 2-4 weeks. A true custom order – a non-standard rough opening, a radius sill, a transomed assembly – is manufactured to your measured dimensions and takes 6-14 weeks depending on the product line. CWS and ECO Window Systems typically run 6-9 weeks for custom units; ViewLux geometric orders run 10-14 weeks. We give you the manufacturer’s current lead-time estimate in writing at the time of order.
• Frame condition and substrate: Weston homes built in the 1990s and early 2000s sometimes have wood bucks that have absorbed moisture over two decades of subtropical humidity. If the measured survey finds rot or compromised substrate, reframing is required before the new unit goes in. This adds $150-$400 per opening and is documented on the scope before a single piece of old frame comes out.
• Product line and manufacturer tier: Sightline works with eight manufacturer lines. PGT and ES Windows represent the mid-performance tier with reliable availability and the widest standard size range. CGI and CWS sit in the upper-mid tier, with stronger aluminum profiles and longer warranties. ECO Window Systems and ViewLux occupy the performance tier for homeowners with specific SHGC or U-factor targets – common in Weston’s larger homes where energy modeling informs the spec. The tier you land on is driven by what the opening requires, not by what’s in our warehouse.
• Installation access and site conditions: Ground-floor openings in a single-story ranch are the simplest access scenario. Second-story openings on a two-story Weston home in Sector 7 or Windmill Ranch Estates require staging or ladder systems, adding 20-35 minutes per opening. Interior furniture and window treatments that need temporary removal are noted during the survey so the install crew arrives knowing exactly what the site looks like.

Before

After

A Note on Weston-Specific Code and Climate Factors

Weston’s building department operates under the 8th edition of the Florida Building Code (effective 2024), which tightened energy performance requirements for fenestration in Climate Zone 1 – the category that covers all of South Florida including Broward County. New custom window orders must now meet a maximum U-factor of 0.65 and a maximum SHGC of 0.25 for residential applications. Most impact windows we specify already meet or exceed this threshold, but it’s worth confirming on every custom order, especially older product configurations that a homeowner might have priced elsewhere a year ago.

The proximity to the Everglades creates a specific corrosion environment that’s different from beachfront Broward communities like Hollywood or Deerfield Beach. Weston doesn’t have the same salt-spray exposure, but the high ambient humidity and seasonal flooding in low-lying streets – particularly near the Weston Regional Park corridor – accelerate oxidation on aluminum frames that aren’t properly anodized or powder-coated. Every product line we specify for Weston installations uses a minimum 70% PVDF (Kynar) finish or equivalent. That specification appears by name on your written quote.

Homeowners in Weston’s Bonaventure and Indian Trace communities often have HOA design review requirements that affect finish color selection, frame profile visibility from the street, and glass reflectivity. We’ve worked with Weston HOA boards since 2012 and know which product configurations tend to sail through DRC review and which ones require additional documentation. If your address falls under an HOA with design guidelines, let us know at the survey – we’ll document the spec to match the guidelines so you’re not going back to the board a second time.

How to Save on Custom Window and Door Orders in Weston

Order Multiple Openings at Once

Custom window manufacturing has a fixed setup cost per order. A single custom window ordered alone carries that setup cost entirely. When you order 8 or 12 windows in a single release to the manufacturer, the per-unit cost typically drops $80-$180 per opening. On a 10-window order, that’s a real $800-$1,800 reduction without changing anything about the product. If your project budget requires phasing, we can discuss which openings are most urgent and sequence the order to minimize per-unit overhead.

Bring in a Competitor’s Written Quote

Sightline offers a free second opinion on any written estimate from another contractor. If you’ve already received a written scope and price from another installer, bring it to us. We’ll review it line by line, tell you what the product specification actually means, and give you our own written number for comparison. There’s no charge for this, and there’s no pressure to proceed with us. The whole point of Haven Clause 1 – written price before any work starts – is that you should never be making a decision without something on paper.

Understand What’s Actually in the Quote

A low per-window number that excludes permit fees, haul-away, and buck repair can end up costing 20-30% more than a higher headline number that includes everything. When comparing quotes in the Weston market, ask specifically: Does this price include the Broward County permit? Does it include removal and disposal of the old unit? Does it include any masonry or framing work identified during the site measure? At Sightline, the measured survey and the final invoice are the same document – there’s no separate line that appears later.

Check FPL Rebate Eligibility

Florida Power & Light offers rebates for qualifying window replacements that improve the thermal performance of the building envelope. In 2026, the FPL residential rebate for qualifying impact windows with a low U-factor and SHGC runs up to $5 per square foot of glass area for verified installations. On a 10-window replacement with an average glass area of 8 square feet per unit, that’s up to $400 back. The rebate requires documentation – product approval numbers, U-factor and SHGC specs from the manufacturer, and a completed rebate form. We provide all supporting documentation as part of the standard job record.

Time the Order Around Manufacturer Lead Times

Lead times for custom orders from most of our manufacturer lines run shorter in January through March – after the post-storm season rush settles and before the late-spring build season picks up. If you’re not on a tight deadline, ordering in that window typically means a 6-9 week lead time instead of 10-14 weeks for complex custom configurations. Faster lead time also means less exposure to material cost increases mid-order.

To get a written price for your specific openings, call (754) 812-9260. The estimate is free, the number you receive is the number you’ll pay, and if you’d rather text than call, our line handles both.

FAQs – Custom Window and Door Order Cost in Weston

How much does a custom impact window cost in Weston, FL?

A custom impact window in Weston costs between $850 and $4,800 installed, depending on the size, glass specification, and frame material. A standard mid-size opening (36″ x 48″) with a laminated low-E unit in an aluminum frame typically lands around $1,400-$2,000 installed. Geometric or non-rectangular custom shapes start at $1,800 and can reach $5,500 for large radius configurations. Call (754) 812-9260 for a written number tied to your specific rough opening dimensions.

Does the price include the Broward County building permit?

Yes – Sightline’s written quotes for Weston projects include the permit fee as a line item. Permit costs for a typical Weston residential window or door replacement run $180-$420 depending on the number of openings and declared job value. We pull and file the permit; the inspection is scheduled around your timeline. The permit number and inspection record become part of the documented job file we leave with you at completion.

How long does a custom window order take from survey to installation in Weston?

From the measured survey to installation, most custom window orders for Weston homes take 8-12 weeks total. The survey and written quote take one visit. Permit approval from the City of Weston building department typically takes 2-3 weeks. Manufacturer lead times vary: PGT and ES Windows custom orders currently run 6-8 weeks; CWS and CGI run 7-10 weeks; ViewLux geometric orders run 10-14 weeks. We give you the current lead-time estimate in writing at the time you approve the order – not a guess, an actual manufacturer confirmation.

Is it cheaper to order one custom window or do a full house at once?

A full-house order is cheaper on a per-unit basis by $80-$180 per opening compared to ordering one window at a time. The savings come from shared manufacturing setup costs and a single permit pull. On a 10-window order, that’s a real reduction of $800-$1,800. That said, if budget requires phasing the project, we can structure the order to address the highest-priority openings first and document the scope for later phases at the same per-unit pricing – no re-survey fee for phases executed within 12 months of the original measured survey.

Do Weston HOA rules affect custom window and door costs?

HOA design review in communities like Bonaventure, Indian Trace, and Windmill Ranch Estates can affect finish color and frame profile selection, which may limit your product options and in some cases add $100-$300 per opening for a specific finish color that isn’t a standard stock offering. The review process itself – preparing the documentation package for your HOA’s DRC – is included in our service at no additional charge. We document the product spec to match the HOA guidelines in the initial written scope so you’re not going back to the board with revisions.

What is the 365-Day Done Right Promise and does it apply to custom orders?

The 365-Day Done Right Promise means that if anything about the installation isn’t done right – a sightline that’s off, a seal that fails, hardware that doesn’t function as specified – we come back and make it right at no charge for one full year from the installation date. It applies to every job Sightline completes, including custom orders. It’s written into the Haven Standard that has governed every installation we’ve completed since 2012, not offered as a verbal assurance or a conditional promotion. The promise is on the invoice you keep.

What the Sightline Process Looks Like for a Custom Order in Weston

Every custom window or door order at Sightline begins with a measured survey. One of our background-checked, uniformed technicians comes to your Weston home, reads the rough opening dimensions at the frame (not the glass, not the visible opening – the structural rough opening), notes the substrate condition, documents the existing product spec if you’re replacing, and photographs the opening. That survey document is yours to keep. The written quote that comes from it cannot differ from the survey – the measurement and the price are the same document, which is the founding principle Sonia Raman built Sightline on in 2012.

Once you approve the written quote, we pull the Broward County permit, place the factory order with your specified manufacturer, and give you a confirmed lead-time date in writing. When the product arrives and passes our incoming inspection, we schedule installation around your availability. The install crew arrives uniformed and identified by license number before they set foot on your property – Haven Clause 3 (Verified Crews) is not a background screening we did once; it’s the standard for every visit.

At completion, we schedule the building department inspection, leave you the documented photo record of the finished installation, and hand you the written 365-Day Done Right Promise. The permit closes when the inspector signs off. You get a copy of the signed inspection report.

For homeowners in Weston who have used our Custom Window & Door Order in Weston service, this process is familiar. For those coming to Sightline for the first time, the short version is: nothing starts without a written price, nothing ends without a documented record, and nothing is left to a verbal agreement. If you want to see how that plays out for your specific home, the process begins with a call.

Key Takeaways

• Custom impact windows in Weston run $850-$4,800 per unit installed; custom entry doors run $3,200-$9,800 installed.
• Whole-home custom window packages for a typical Weston home land between $12,000 and $38,000 installed, including permit fees.
• Broward County’s HVHZ designation means every product requires a Miami-Dade NOA or Florida Product Approval number – confirm this is on any quote you receive.
• Permit fees are a real line item ($180-$420 typical) – ask any contractor whether the price includes them or adds them later.
• Custom lead times run 6-14 weeks depending on the manufacturer and product configuration; we give you the confirmed date in writing at order placement.
• FPL rebates of up to $5 per square foot of qualifying glass area are available in 2026 – we provide all supporting documentation as part of the standard job record.
• The 365-Day Done Right Promise covers every custom order Sightline installs – written into the Haven Standard, on every invoice.
• A free second opinion on any written competitor estimate is available – call (754) 812-9260 to arrange it.

Ready to Get a Written Price for Your Weston Home?

The fastest way to know what your specific custom window or door order will cost is a measured survey – the same visit that produces the written quote. There’s no separate estimate fee, no quote that later becomes a different invoice. Sightline Windows & Doors serves Weston homeowners across Bonaventure, Indian Trace, Windmill Ranch Estates, The Ridges, and surrounding Sector communities. You can learn more about how we work on our home page, or call (754) 812-9260 directly to schedule your survey. Calls are answered by a live person, and if you’d rather start with a text, that number handles both.

Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Weston, FL since 2012.

Pricing reflects the Weston market as of 2026. Sightline Windows & Doors Weston offers free estimates – call (754) 812-9260.