VLX 80 Awning Window

VLX 80 Awning Window in Weston, FL | Sightline Windows & Doors Weston

The VLX 80 Awning Window is a top-hinged aluminum window engineered for homeowners who want fresh air without worrying about Florida’s sudden afternoon storms. At Sightline Windows & Doors Weston, we’re an authorized installation partner for ViewLux, which means every unit we sell is backed by genuine manufacturer support and installed to preserve your full warranty coverage. Homeowners across Weston, FL choose this window for kitchens, bathrooms, and above-sink placements where ventilation matters but water intrusion doesn’t. The thermal break construction keeps cooling costs down during our brutal summer months, and the clean aluminum profile works with everything from Mediterranean stucco to modern minimalist facades. If you’re researching awning windows for a renovation or new build in Weston, call us at (754) 812-9260 to schedule a free on-site measurement and written estimate.

Call (754) 812-9260

Product Overview - VLX 80 Awning Window

The VLX 80 follows a straightforward design philosophy: a window should do its job without demanding attention. The top-hinged aluminum frame swings outward from the bottom, creating a natural awning effect that sheds rain while still pulling in cross-breezes. In Weston, where afternoon thunderstorms arrive fast and hard, that combination matters more than most places.

Buyers gravitate toward this series for three practical reasons. First, the aluminum construction resists the salt-laden humidity that corrodes lesser frames within five to seven years along Florida’s southeastern coast. Second, the integrated thermal break separates interior and exterior aluminum surfaces, cutting conductive heat transfer significantly compared to non-thermal-break alternatives. Third, the slim sightlines, just under two inches in profile width, preserve glass area and daylight without the bulky frame look of vinyl replacements.

Architecturally, the VLX 80 fits transitional and contemporary homes throughout Weston particularly well. The rectangular proportion, clean corners, and minimal hardware visible from the exterior complement the flat rooflines and large overhangs common in newer construction off Bonaventure Boulevard and the Arvida Parkway corridor. That said, we’ve installed these in traditional Florida ranch homes too, especially in secondary bedrooms and utility spaces where function leads and the window doesn’t need to carry the whole aesthetic.

The materials and engineering behind the frame start with a 0.079-inch wall thickness in the aluminum extrusion. That’s substantial enough to resist racking and warping under wind load without the overweight bulk that makes installation sloppy. The corner joints are mechanically joined and sealed, not just snapped together. Hardware is stainless steel where it contacts the frame, which matters long-term in our climate.

Technical Specifications

The 1.97-inch profile width gives the VLX 80 enough structural depth for proper glazing pocket design and drainage channels, while still reading as a refined, narrow frame from inside and out. The 0.079-inch wall thickness provides the rigidity needed for large-format awning units without the thermal penalty of solid aluminum.

Before

After

Performance Features

Thermal Efficiency
The polyamide thermal break in the VLX 80 frame interrupts heat flow through the aluminum, earning NFRC-certified performance numbers that matter for Energy Code compliance in Broward County. During Weston’s summer stretches, the interior frame surface stays closer to room temperature, reducing condensation risk and the load on your AC system.

Acoustic Performance
The frame’s thermal break chamber geometry, combined with proper glazing selection, delivers measurable sound control improvement over single-pane or non-thermal-break alternatives. For homes near I-75, I-595, or the busier stretches of Weston Road, pairing the frame with laminated glass drops exterior noise transmission substantially.

Airtightness & Weather Seal
Dual compression seals at the sash-to-frame closure point, plus a continuous bulb seal along the hinge side, maintain positive pressure against infiltration. The design targets the airtightness benchmarks referenced in AAMA 2400/2410 installation standards, not just the frame itself but the complete installed assembly.

Waterproofing
Rain hits the sloped sash and runs down and out. Internal weep channels with baffles prevent water from backing up into the wall cavity. During installation, our crews apply AAMA 812 low-expansion foam sealant at all perimeter joints, creating a secondary moisture barrier between the window frame and the rough opening.

Wind Resistance
The extruded aluminum frame, mechanical corner construction, and stainless steel hardware are wind-load rated for South Florida’s requirements. For homes in Weston subject to the High Velocity Hurricane Zone criteria, the laminated glass option upgrades the assembly to impact-resistant status without changing the exterior appearance.

Security & Hardware
Multi-point locking engages at the sash rail and stile simultaneously. The stainless steel hinges and corrosion-resistant fasteners hold up to years of salt-air exposure without the sticking or binding that compromises security in cheaper hardware. The handle operation is smooth enough that you’re not tempted to leave it unlatched.

Color & Glass Options

The six finish options cover most architectural directions we see in Weston. Premium Black and Anodized Silver dominate contemporary and modern homes, especially in the newer developments west of Indian Trace. Pure White remains the safe choice for traditional Florida architecture and resale value. Bronze and Champagne warm up Mediterranean and transitional exteriors without the maintenance of actual wood. Teak Wood grain finish gives you the organic look for coastal or tropical-styled homes, though it’s aluminum underneath, so no refinishing every three years.

Glass selection should match the window’s location and your priorities. Clear glass maximizes visible light and view, appropriate for upper-story applications or where privacy isn’t a concern. Frosted works for bathrooms and side-yard exposures in tighter Weston lots. Low-E coating is the practical default for most installations, reflecting infrared heat while passing visible light. Tempered glass is code-required for windows near doors, stair landings, and wet areas. Laminated glass adds the impact resistance for HVHZ compliance and the best acoustic damping, though it carries a weight and cost premium.

Screen choice is simpler. The Fixed Screen stays in place year-round, fine for windows you operate seasonally or rarely. The Retractable Screen rolls away when not needed, preserving the clean sightline and making exterior cleaning easier. In Weston, where pollen season runs heavy in spring, the retractable option lets you store the mesh clean rather than watching it turn green.

Installation by Sightline Windows & Doors Weston in Weston

We install every VLX 80 to the standards that protect your investment, not just the standards that get the job done fast. Our process starts with a pre-install inspection of the rough opening: we check for square, level, and plumb within 1/8 inch across the width and height. In Weston, where stucco exteriors and concrete block construction are standard, rough openings often need subtle adjustments. We make them before the window goes in, not after.

The frame gets set on a bed of sealant, shimmed to dead level, and mechanically fastened through the jamb into the structural framing per AAMA 2400/2410. We don’t rely on screws through the sill, which creates thermal bridges and water paths. Once the frame is fixed, we fill the perimeter gap with AAMA 812 low-expansion foam sealant, not the cheap gap filler that crumbles in five years. The foam expands to fill irregularities, cures to a flexible seal, and doesn’t transmit the way fiberglass does.

After installation, we run a water test on the exterior, checking weep paths and seal continuity. Then we clean the glass, vacuum the tracks, and walk you through the operation and locking. You sign off on a checklist that documents the installation conditions for your warranty file.

Here’s what homeowners in Weston often don’t realize: ViewLux’s manufacturer warranty requires professional installation by an authorized partner. DIY or handyman installation voids coverage. The warranty language is explicit about level, plumb, and square tolerances, proper shimming, and approved sealants. We’ve seen homeowners lose coverage over a $12 tube of wrong sealant. Our authorization exists specifically so that doesn’t happen to our clients.

Weston’s climate demands specific attention too. The combination of intense UV, high humidity, and salt air means sealants degrade faster here than inland. We use products rated for South Florida exposure. Our fastening patterns account for the wind loads in Broward County’s jurisdiction. And we understand the local inspection requirements if your project triggers a permit, which most window replacements in Weston do when they’re part of a larger renovation or involve impact-rated assemblies.

Frequently Asked Questions - VLX 80 Awning Window

What is the lead time for the VLX 80 Awning Window?
Lead time typically runs four to six weeks from signed approval to delivery, depending on glass and finish selection. Laminated glass and custom sizes extend toward the longer end. Standard clear glass with Premium Black or Pure White finish usually hits the shorter range. Call (754) 812-9260 for current scheduling, estimates are free.

Does the VLX 80 qualify for energy tax credits?
The NFRC-certified thermal performance and Low-E glass options meet the criteria for federal energy efficiency tax credits when installed as part of a primary residence. We provide the certification documentation you need for your tax preparer. Exact credit amounts change with federal legislation, so verify current year limits with your accountant.

What warranty comes with the Awning Window?
ViewLux backs the frame and hardware with a limited lifetime warranty for residential applications, with glass coverage varying by type: ten years for standard insulated glass, longer for certain upgraded packages. The warranty transfers once to a subsequent owner. Coverage requires authorized installation, which is why Sightline Windows & Doors Weston’s partner status matters for your protection.

Can I customize the size?
Yes, the VLX 80 is available in custom widths and heights within the series’ engineering limits. We measure your rough opening, confirm structural support for the span, and spec the unit accordingly. Oversized awnings may require additional hardware or fixed transom combinations. Call (754) 812-9260 to schedule measurement and discuss your opening.

How do I maintain aluminum frames?
Wash frames twice yearly with mild soap and water, rinse thoroughly, and operate locks and hinges to distribute lubricant. Never use abrasive cleaners or pressure washers, which damage anodized and painted finishes. Check weep holes for debris after storms, especially if you’re near Weston’s golf course communities where organic matter blows heavy. The stainless steel hardware needs no additional lubrication under normal use.

Get a Quote - VLX 80 Awning Window in Weston

Ready to see how the VLX 80 fits your project? We’ll bring samples, measure your openings, and deliver a written line-item quote with no pressure and no obligation. Every estimate includes finish and glass options, screen selection, and installation scoped to your home’s specific conditions in Weston. Call (754) 812-9260 or stop by to talk through your plans. Let’s get your windows right the first time.

Written by the team at Sightline Windows & Doors Weston, authorized ViewLux installation partner serving Weston, FL.