Custom & Geometric Windows in Weston - Free In-Home Measure, Written Price

Trusted Custom & Geometric Windows for Weston Homeowners

Custom and geometric windows in Weston typically cost $1,800 to $6,500 per opening depending on shape complexity, impact rating, and glazing specification, with most measured surveys scheduled within 48 hours and installations completed in one to three days. Sightline Windows & Doors Weston has installed 18,000+ openings since 2012, every one with a written price before work started and a documented photo record when finished. Call (754) 812-9260 to schedule your measured survey.

Call (754) 812-9260

Weston’s architecture runs toward Mediterranean Revival, contemporary coastal, and custom estate builds in neighborhoods like Windmill Ranch Estates, Savanna, and The Ridges. These homes weren’t designed around stock window sizes. Arched transoms above entryways, trapezoid gable windows, circular oculi, and oversized curtain-wall openings are common here, and they require precise measurement, manufacturer coordination, and installation discipline that standard window crews don’t practice. We’ve measured and installed custom geometric units in Weston since 2012, from single arched replacements in Tequesta to full custom curtain-wall systems in new construction along Bonaventure Boulevard, and we bring the same precision to our Custom & Geometric Windows - Pembroke Pines projects. Our measured survey is the document you keep; our written quote cannot differ from it. That’s Haven Clause 1.

What Our Custom & Geometric Windows Service Includes

Custom Impact Windows

Custom impact windows are manufactured to your opening’s exact dimensions with laminated glass and reinforced frames rated for Miami-Dade HVHZ standards. In Weston, these are required for any new construction or replacement in the High-Velocity Hurricane Zone, and they’re the practical choice for homeowners who want protection without aftermarket shutters. We specify custom impact units from PGT, CGI, and CWS, measured to the sixteenth of an inch, with the frame depth and anchoring pattern documented on your survey. The glazing specification, U-factor, and SHGC are named in writing before any deposit is taken. We’ve installed custom impact windows in Weston homes where the original builder used standard rectangles in arched openings, leaving exposed framing and water intrusion paths we had to correct.

Geometric & Shaped Windows

Geometric and shaped windows include triangles, trapezoids, pentagons, octagons, and any non-rectangular unit that follows an architectural line rather than a standard grid. These are common in Weston gable ends, stairwell landings, and accent walls where the architect specified a visual element, not just daylight. We measure the true polygon, not a rectangle approximation, and specify from manufacturers including ES Windows and ECO Window Systems who maintain geometric tooling programs. A trapezoid we measured last year in Savanna had a 14-degree slope difference between the left and right jambs; the previous installer had ordered a rectangle and trimmed it in the field, which is why the stucco was cracking. Our survey caught the discrepancy. The replacement fit without shimming.

Arched & Curved Windows

Arched and curved windows require either true radius manufacturing or segmented construction, and the choice affects price, sightline clarity, and long-term seal integrity. True radius units are extruded or rolled to a specified radius; segmented units approximate the curve with flat glass lites joined at angles. In Weston’s Mediterranean Revival homes, particularly in Windmill Ranch Estates and Weston Hills Country Club, we see both original true-radius steel windows from the 1990s and newer segmented vinyl replacements that have begun leaking at the joints. We measure the chord, rise, and radius of every arched opening, document whether the original was true radius or segmented, and specify the replacement method in your written scope. ECO Window Systems and Mr-Glass both produce true-radius impact-rated units we regularly specify for Weston arched openings.

Oversized Openings

Oversized openings exceed standard manufacturing dimensions and require structural engineering review, reinforced framing, and often crane or specialized lifting equipment for installation. In Weston, we see these in contemporary custom homes along Arvida Parkway and in second-story great rooms where the architect specified floor-to-ceiling glass. The sightline measurement includes deflection calculations, wind-load analysis per Broward County requirements, and coordination with the structural engineer of record. We’ve installed oversized units up to 120 inches by 144 inches in Weston, using CWS and ViewLux structural systems with steel reinforcing and laminated glass. Every oversized opening we measure includes a preliminary structural assessment; if the existing header or king studs are insufficient, we document the required modification in writing before any work begins.

Brands We Service for Custom & Geometric Windows

We specify, measure, and install custom and geometric windows from eight manufacturer lines, selected by what your opening requires, not by what we have in inventory. For custom impact-rated geometric units in Weston, we regularly draw from CWS, whose custom division maintains full geometric tooling for impact-rated aluminum frames with Miami-Dade approval numbers on file, similar to the approach we take with Plantation Custom & Geometric Windows. We’ve specified CWS custom trapezoids and arched units in over 200 Weston openings since 2012, and we maintain direct factory communication for lead-time confirmation and warranty registration. ES Windows produces a strong line of custom geometric vinyl and aluminum-clad units with competitive lead times for non-impact and impact-rated applications; we specify their products for Weston’s energy-efficient custom projects where U-factor and SHGC performance matter as much as the shape.

ECO Window Systems manufactures true-radius and segmented arched units in both impact and non-impact grades, with a specialty in replicated steel sightlines for historic-look replacements. Mr-Glass provides custom laminated glass for oversized and specialty applications where standard glazing won’t meet structural or acoustic requirements. Whether you have CWS, ES Windows, ECO Window Systems, Mr-Glass, or any other make, we can measure, specify, and install the replacement. Our home page lists our full service categories. For custom geometric work in neighboring communities, see our pages on Custom & Geometric Windows in Southwest Ranches and Custom & Geometric Windows in Pembroke Pines.

Before

After

Signs You Need Custom & Geometric Windows Right Now

• Visible daylight around arched or geometric frame edges. This indicates the unit was never properly measured or has settled out of square. In Weston’s sandy soils, foundation movement is common, and a geometric window that fit when installed may now show gaps at the spring line or radius points. Water follows these paths into the wall cavity, and the damage compounds until the surrounding framing requires repair.
• Fogging or condensation between panes in shaped units. Insulated glass seals fail faster in geometric windows because the spacer system must follow a non-rectangular path, creating stress concentration points. Once the seal fails, the Low-E coating degrades and the thermal performance drops. In Weston, where cooling loads run high eight months of the year, this shows up on your FPL bill before you notice the fog.
• Cracked stucco or interior drywall at window corners. Geometric windows transfer structural loads differently than rectangles; an improperly specified or installed unit will concentrate stress at the angle points. We’ve traced cracks in Weston homes to arched windows where the installer used standard rectangular bucks in a radius opening, creating a hard point with every thermal cycle.
• Previous “custom” window was field-modified from a rectangle. If you can see caulk lines, filler strips, or altered frame profiles, the original installer took a shortcut. This is common in Weston’s production-built sections from the 2000s, where builders ordered standard sizes and trimmed on site to match architectural plans. The result is compromised weather sealing, reduced structural integrity, and often voided manufacturer warranties.
• Impact rating cannot be verified or documented. After Hurricane Irma, many Weston homeowners discovered their geometric windows lacked proper Miami-Dade NOA documentation. If you’re selling, refinancing, or simply want your insurance discount validated, you need the product approval number, the installation method, and the permit record. We document all three on every custom impact installation.

Our Custom & Geometric Windows Process - Step by Step

1. 1
   Measured survey with documented sightlines. Our technician arrives with a laser measure, digital level, and documentation tablet. We record every dimension to the sixteenth of an inch: width, height, diagonal squareness, jamb plumb, sill level, and for geometric units, the chord, rise, radius, and any asymmetry. You receive a copy of this survey before we leave. It is the basis for your written quote and, under Haven Clause 1, the final invoice cannot differ from it.
2. 2
   Specification and written scope. Within 24 hours of the survey, we issue a written scope naming the manufacturer, product line, glazing specification, U-factor, SHGC, impact rating if applicable, frame depth, anchoring method, and finish color. For geometric units, we include a CAD confirmation drawing from the manufacturer for your approval before production begins. No deposit is taken until you approve the specification in writing.
3. 3
   Manufacturer coordination and lead-time confirmation. Custom and geometric windows carry longer lead times than stock units, typically 6 to 14 weeks depending on complexity and current factory scheduling. We maintain direct communication with CWS, ES Windows, ECO Window Systems, and our other manufacturer partners to confirm production slots and notify you of any changes. You receive a scheduled installation date with a 48-hour confirmation call.
4. 4
   Installation by verified crews. Haven Clause 3 requires that the technician at your door is the person on the record: background-checked, uniformed, and identified by license number before arrival. Our installation process follows the manufacturer’s published installation method, not a generic approach. For geometric and oversized units, this includes proper shimming at load points, sealant compatibility with the frame finish, and structural anchoring per the engineer’s detail if required.
5. 5
   Documented photo record and 365-Day Done Right Promise. Every installation is photographed before, during, and after completion. You receive access to this photo record as standard evidence, not as an upsell. The 365-Day Done Right Promise, written into the Haven Standard since 2012, means that if any aspect of the installation is not done right, we make it right. No courtesy request required; it’s stamped on every job.

How Much Does Custom & Geometric Windows Cost in Weston?

Custom & Geometric Windows Near Weston - Our Service Area

We measure and install custom and geometric windows throughout Broward County and into southern Palm Beach County, with typical response times of same-day to 48 hours for surveys in Weston, Southwest Ranches, Pembroke Pines, Davie, Cooper City, and Plantation. Miramar, Sunrise, Tamarac, and Lauderhill are regularly within our weekly rotation. For projects in Broadview Park and Palm Springs North, we typically schedule surveys within 72 hours. We’ve installed custom geometric units in every one of these cities, and the measurement discipline, manufacturer coordination, and installation standards are identical regardless of distance from our Weston base. The Custom & Geometric Windows in Southwest Ranches page covers our work in that estate community, where oversized arched openings and custom shapes are particularly common.

Frequently Asked Questions - Custom & Geometric Windows in Weston

Schedule Your Custom & Geometric Windows Service in Weston Today

Call (754) 812-9260 to schedule your free measured survey. You’ll receive a written price before any work starts, a documented photo record when the job is done, and the 365-Day Done Right Promise on every installation. Live phone coverage is available 24/7. Our technicians are background-checked, uniformed, and identified by license number before arrival. Whether you’re replacing a single arched window in Tequesta or specifying custom geometric units for new construction in Windmill Ranch Estates, the Haven Standard governs every step.

Written by Sonia Raman, Owner at Sightline Windows & Doors Weston, serving Weston since 2012.