Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Davie, FL
Window installation in Davie typically runs $650-$1,850 per opening for standard vinyl or aluminum replacement, with impact-rated upgrades starting near $1,200. Most Davie homeowners we meet are replacing original single-pane aluminum or jalousie windows in 1970s-1980s CBS ranch homes, and every job starts with a measured survey you keep, followed by a written price that does not change. Call (754) 812-9260 to schedule your free estimate.
Davie’s inland position in Broward County creates a specific misconception we address on every visit: homeowners often believe Florida Building Code hurricane-impact requirements do not apply because they are not on the coast. That is incorrect. Any permitted window or door replacement in Davie must meet FBC impact standards or use approved shutters, and the humidity here accelerates seal failure in older IGUs faster than many owners expect. Our crews are dispatched from the Miami office and work Davie properties regularly.
Why Davie Homes Are Different
Davie’s housing stock is dominated by concrete block ranch-style homes built between roughly 1965 and 1990 on quarter-acre-plus lots, a footprint preserved by the town’s active equestrian zoning. These properties frequently retain original louvered jalousie windows in bedrooms and utility rooms, oversize sliding glass doors to screened patios, and non-impact aluminum frames throughout. The combination of age, material, and code evolution means full replacement is usually more economical than repair.
The equestrian overlay zoning also produces a notable secondary market: working horse barns, tack rooms, and stables with non-standard door openings that require custom or agricultural-grade solutions rarely encountered in neighboring Plantation or Miramar. South Florida’s sustained humidity corrodes aluminum frames and degrades IGU seals on a predictable timeline, while hurricane season adds the structural requirement that any new opening must either be impact-rated or paired with approved protection. We have replaced windows in homes along Orange Drive, Nova Road, and throughout the Ivanhoe and Shenandoah neighborhoods where these conditions repeat.
Our Main Davie Services
Most Davie homeowners who contact us are looking for one of these three services:
Window Replacement in Davie
Full-frame and insert replacement of original single-pane aluminum, jalousie, and early vinyl windows in Davie’s 1970s-1980s ranch homes. We measure every opening to the nearest 1/8 inch, specify impact-rated or energy-efficient upgrades to current FBC, and install with documented photo records. Window Replacement in Davie covers our complete process from survey to final walkthrough.
Impact Windows & Doors in Davie
Impact-rated glazing and framing for homeowners updating to current Florida Building Code without shutter systems. We specify laminated glass and reinforced frames from PGT, CGI, and ES Windows based on your exposure and budget, with written prices before any order is placed. Impact Windows & Doors in Davie details product tiers and performance specifications.
Sliding & Patio Doors in Davie
Replacement of original aluminum sliding doors that no longer roll smoothly, seal properly, or meet impact requirements. We measure the rough opening, verify header capacity, and install multi-panel or lift-and-slide systems with matching sightlines to adjacent windows. Sliding & Patio Doors in Davie explains frame options and hardware selections.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Davie
Window installation in Davie means working with the specific conditions of 1970s-1980s CBS construction: original single-pane aluminum frames, jalousie windows in bedrooms and utility rooms, and rough openings that may have settled or corroded over forty-plus years of humidity exposure. We begin every project with a measured survey you keep, specify products from our eight manufacturer lines based on opening size and exposure, and install to FBC impact or shutter-alternative compliance with a documented photo record at completion. Window Installation covers our full technical scope.
Single & Double Hung Windows
Signs you need it
Your sashes no longer stay open without a prop, you feel air movement at the meeting rail, or the aluminum frame shows white oxidation and pitting from humidity corrosion.
What it costs in Davie
Standard vinyl single or double hung installation in Davie runs $650-$1,250 per opening; impact-rated aluminum or vinyl upgrades range $1,200-$1,850 depending on size and glass package.
How we do it
We remove the sash and frame, inspect the rough opening for moisture damage or block deterioration, install the new unit with backer rod and sealant to FBC standards, and finish with interior trim matched to your existing profile.
Horizontal Roller Windows
Signs you need it
The sash jumps the track, the rollers grind instead of glide, or you can see daylight between the sash and frame when closed.
What it costs in Davie
Horizontal roller replacement in Davie typically falls between $750-$1,400 for standard sizes; impact-rated units with laminated glass run $1,350-$2,100.
How we do it
We measure the daylight opening and frame depth, specify a roller system rated for the sash weight and local wind load, install with continuous head and sill flashing, and test operation before documenting the completed condition.
What Window Installation Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Standard vinyl single/double hung | $650 - $1,250 |
| Impact-rated single/double hung | $1,200 - $1,850 |
| Horizontal roller (standard) | $750 - $1,400 |
| Horizontal roller (impact-rated) | $1,350 - $2,100 |
Do you pull permits for window replacement in Davie?
Yes. Any window replacement in Davie requires a Broward County permit and inspection to verify FBC compliance; we handle the application, scheduling, and final inspection as part of every job. Call (754) 812-9260 and we will confirm the permit timeline for your specific project.
Will the price change once work starts?
No. Haven Clause 1 means the written price from our measured survey is the final price; the only change would be if hidden structural damage is found, and we document that with photos and pause for your approval before proceeding. Call (754) 812-9260 for your free estimate.
Door Installation in Davie
Door installation in Davie addresses the same era-specific problems as windows: original hollow-core or uninsulated metal entry doors on 1970s-1980s ranch homes, non-impact sliding patio doors with failed rollers, and garage-to-house doors that do not meet current FBC. The humidity here swells jamb stock and corrodes threshold fasteners on a predictable schedule, and many homeowners we meet in Davie are surprised to learn that any door replacement requires impact rating or approved shutters under current code. Door Installation details our measured survey process and product specifications.
Entry Doors
Signs you need it
Your door sticks seasonally, the jamb is soft at the threshold, or you can see light around the perimeter when closed.
What it costs in Davie
Standard fiberglass or steel entry door installation in Davie runs $1,200-$2,400; impact-rated fiberglass with laminated glass inserts ranges $2,800-$4,500.
How we do it
We measure the rough opening and check floor level, specify a pre-hung unit with composite or aluminum threshold, install with shims and structural screws, and seal with backer rod and low-expansion foam before installing lockset hardware you provide or we supply.
Hurricane-Proof Front & Entry Doors
Signs you need it
You are replacing any exterior door in Davie and want to eliminate shutter storage and installation; FBC requires impact rating or approved protection for all new door installations.
What it costs in Davie
Impact-rated entry door systems in Davie, including frame, hardware, and laminated glass, typically range $2,800-$4,500; oversized or decorative-lite units may reach $5,200-$6,800.
How we do it
We verify the rough opening against the manufacturer’s wind-load chart, install a reinforced frame with structural anchors at 12-inch centers, hang the door with three or more hinges rated for the door weight, and test latching under pressure before scheduling inspection.
What Door Installation Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Standard fiberglass/steel entry door | $1,200 - $2,400 |
| Impact-rated entry door system | $2,800 - $4,500 |
| Oversized impact entry door | $5,200 - $6,800 |
Do I need impact-rated doors if I’m inland in Davie?
Yes. Florida Building Code applies statewide; Davie’s inland location does not exempt any replacement door from impact-rating or approved shutter requirements. Call (754) 812-9260 and we will specify compliant options for your opening.
How long does door installation take?
Most standard entry door replacements in Davie are completed in one day; impact-rated or oversized units may require a second day for inspection scheduling. Call (754) 812-9260 for a timeline based on your specific door and permit status.
Energy-Efficient Windows in Davie
Energy-efficient windows in Davie solve a problem the original 1970s-1980s housing stock was not designed for: single-pane aluminum frames conduct heat directly into conditioned space, and failed IGU seals from humidity exposure destroy any remaining insulation value. We specify low-E coatings, argon gas fill, and thermally broken frames based on each opening’s solar exposure and your cooling load, with U-factor and SHGC values documented on the quote. Energy-Efficient Windows explains performance ratings and manufacturer specifications.
Low-E & Argon Gas Glass
Signs you need it
Your west- and south-facing rooms are noticeably hotter than the rest of the house, or your energy bills spike in summer despite thermostat settings that have not changed.
What it costs in Davie
Low-E with argon gas fill added to standard vinyl window installation in Davie adds $80-$150 per opening; full replacement with energy-efficient IGUs runs $750-$1,450.
How we do it
We calculate solar heat gain coefficient based on orientation and shading, specify the appropriate low-E coating from our manufacturer lines, order IGUs with argon fill and warm-edge spacers, and verify the label ratings at delivery before installation.
ENERGY STAR Replacement Windows
Signs you need it
You are replacing windows anyway and want verified performance data; ENERGY STAR certification requires independent testing for your climate zone.
What it costs in Davie
ENERGY STAR certified vinyl window replacement in Davie ranges $850-$1,650 per opening; impact-rated ENERGY STAR units from ECO Window Systems or ES Windows run $1,450-$2,200.
How we do it
We cross-reference the NFRC label against South Florida climate zone requirements, specify a product that meets both ENERGY STAR and FBC impact standards, install with continuous insulation at the frame perimeter, and provide the certification documentation for your records.
What Energy-Efficient Windows Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Low-E/argon upgrade (add to standard) | +$80 - $150 per opening |
| Full energy-efficient replacement | $750 - $1,450 |
| ENERGY STAR impact-rated replacement | $1,450 - $2,200 |
Will energy-efficient windows lower my cooling bills in Davie?
Yes. Properly specified low-E, argon-filled IGUs with low SHGC reduce solar heat gain by 40-60% compared to single-pane aluminum, which is significant in Davie’s cooling-dominated climate. Call (754) 812-9260 for a load calculation based on your specific openings.
Do energy-efficient windows also meet impact requirements?
Yes. We specify products from ECO Window Systems and ES Windows that carry both ENERGY STAR and FBC impact ratings; the performance data is on the NFRC label and the quote. Call (754) 812-9260 to review options.
Impact Garage Doors in Davie
Impact garage doors in Davie are a code requirement that many homeowners overlook: any garage door replacement must meet FBC wind-load standards, and the large surface area of a double-wide opening creates significant pressure during a storm event. Original 1970s-1980s garage doors in Davie are typically uninsulated, non-impact steel or wood panels with no wind-load rating, and the track hardware is often corroded from humidity exposure. Impact Garage Doors covers wind-load engineering and installation specifications.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker, the panels rattle in moderate wind, or you are replacing any garage door in Davie and need FBC compliance.
What it costs in Davie
Single-car hurricane-rated garage door installation in Davie runs $1,800-$3,200; double-car units range $2,800-$4,800 depending on insulation and window lite options.
How we do it
We measure the opening and calculate wind-load requirements based on exposure and structure height, specify a door and track system rated for the load, install with reinforced struts and heavy-duty brackets, and connect to your opener with force-limit adjustments tested after installation.
Wind-Load Code Compliance
Signs you need it
You have received a permit correction notice, your insurance inspection flagged the garage door, or you are selling and the buyer’s inspection requires FBC verification.
What it costs in Davie
Wind-load retrofit or replacement for code compliance in Davie typically falls between $2,200-$4,500 for standard residential openings; engineered custom sizes may reach $5,500-$7,200.
How we do it
We pull the permit, install the rated door and track with documentation, schedule inspection with Broward County, and provide the wind-load certificate and photo record for your files and your insurer.
What Impact Garage Doors Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Single-car hurricane-rated door | $1,800 - $3,200 |
| Double-car hurricane-rated door | $2,800 - $4,800 |
| Wind-load code compliance retrofit | $2,200 - $4,500 |
Does my garage door need to be impact-rated in Davie?
Yes. Florida Building Code requires all replacement garage doors to meet wind-load standards for the site; Davie is in a 170 mph design wind speed zone. Call (754) 812-9260 and we will calculate the exact rating your opening requires.
Can I keep my existing garage door opener?
Sometimes. We test the opener’s force and travel limits against the new door’s weight and balance; if it cannot be adjusted safely, we specify a replacement compatible with the heavier wind-load door. Call (754) 812-9260 for an assessment.
Custom & Geometric Windows in Davie
Custom and geometric windows in Davie serve two distinct markets: the architectural detail work in main residences, and the functional, non-standard openings in equestrian properties where barns, tack rooms, and stable entries require solutions outside standard residential catalogs. Davie’s preserved equestrian zoning means we regularly encounter round-top stable windows, oversized barn entries, and custom sightline requirements that must still meet FBC impact standards. Custom & Geometric Windows details our measurement and fabrication process.
Geometric & Shaped Windows
Signs you need it
You have arched, circular, triangular, or trapezoidal openings from original construction or a previous renovation that now need replacement or impact upgrading.
What it costs in Davie
Geometric window fabrication and installation in Davie typically ranges $1,800-$3,500 for standard shapes up to 40 inches; larger or compound curves may reach $4,200-$6,500.
How we do it
We create a full-size template or 3D scan of the opening, send it to the manufacturer for engineering review, receive the fabricated unit with FBC impact certification, and install with custom flashing to match the irregular profile.
Oversized Openings
Signs you need it
You are combining multiple windows into one opening, replacing a failed wall of glass, or designing new construction with spans exceeding standard catalog limits.
What it costs in Davie
Oversized custom window systems in Davie, including structural header verification and reinforced framing, generally run $3,500-$7,500 depending on span and glass specification.
How we do it
We verify header capacity with a structural review, specify reinforced mullions or a structural silicone system based on span, coordinate crane or specialized lifting if needed, and install with continuous attachment to the structure at engineered intervals.
What Custom & Geometric Windows Costs in Davie
| Item | Typical range in Davie |
|---|---|
| Geometric/shaped window (standard size) | $1,800 - $3,500 |
| Geometric window (large/compound curve) | $4,200 - $6,500 |
| Oversized custom opening system | $3,500 - $7,500 |
Do custom windows still need to be impact-rated in Davie?
Yes. Any new or replacement window in Davie must meet FBC impact standards regardless of shape or size; we engineer custom units with laminated glass and reinforced frames to comply. Call (754) 812-9260 to review your specific opening.
How long does custom window fabrication take?
Standard geometric shapes typically ship in 6-8 weeks; oversized or compound-curve units may require 10-12 weeks for engineering and fabrication. Call (754) 812-9260 and we will confirm current lead times for your design.
Brands We Service in Davie
We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - selected by performance tier and price range for each opening, not by margin. Common hardware, balances, and weatherstrip for ES Windows and ECO Window Systems are stocked locally, reducing wait times for service calls. our brands
Pricing for Windows & Doors in Davie, FL
| Service | Typical range in Davie |
|---|---|
| Standard vinyl single/double hung window | $650 - $1,250 |
| Impact-rated single/double hung window | $1,200 - $1,850 |
| Horizontal roller window (standard) | $750 - $1,400 |
| Horizontal roller window (impact-rated) | $1,350 - $2,100 |
| Standard fiberglass/steel entry door | $1,200 - $2,400 |
| Impact-rated entry door system | $2,800 - $4,500 |
| Low-E/argon upgrade (per opening) | +$80 - $150 |
| ENERGY STAR impact-rated window | $1,450 - $2,200 |
| Single-car hurricane-rated garage door | $1,800 - $3,200 |
| Double-car hurricane-rated garage door | $2,800 - $4,800 |
| Geometric/shaped window | $1,800 - $3,500 |
| Oversized custom window system | $3,500 - $7,500 |
Prices in Davie move based on opening condition: corroded aluminum frames requiring structural repair, stucco patching after full-frame removal, and permit expediting for time-sensitive sales all add measurable cost. Haven Clause 1 means the price we write is the price you pay; the measured survey and the invoice are the same document.
Neighborhoods We Serve in Davie
We work throughout Davie’s established neighborhoods, from the equestrian properties along Orange Drive to the ranch-home subdivisions near Nova Road and the Shenandoah and Ivanhoe areas. Crews are dispatched from our Miami office and typically schedule Davie projects with morning arrival windows.
- Ivanhoe
- Shenandoah
- Long Lake Ranches
- Forest Ridge
- Stonebrook
Service Area - Cities Near Davie
Our crews work the full Broward County corridor. We regularly schedule projects in Weston, FL to the north, Southwest Ranches, FL adjacent to Davie’s western equestrian areas, Pembroke Pines, FL to the south, and Cooper City, FL to the east. Dispatch and permitting are coordinated from our Miami office; each city maintains its own inspection schedule and we track them individually.
Serving Davie, FL - Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Davie
We typically schedule measured surveys in Davie within 3-5 business days of contact; permit processing through Broward County adds 10-15 business days for most window and door replacements. Call (754) 812-9260 to check current availability.
Many Davie subdivisions do. We provide the product data sheets, color samples, and installation details your HOA architectural committee requires; we do not start work until written approval is in hand. Call (754) 812-9260 and we will coordinate the submittal.
Broward County requires a building permit for any window or door replacement to verify FBC compliance; we handle the application, scheduling, and inspection as part of every job. Call (754) 812-9260 for the specific permit timeline for your project.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Davie Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.