Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Sunrise, FL
Window and door installation in Sunrise, FL typically runs $650-$2,800 per opening depending on product tier, with most permitted replacements requiring HVHZ-rated impact products under Broward County code. We measure every opening on site, produce a written quote you keep, and install from eight verified manufacturer lines including PGT, CGI, and ES Windows. Call (754) 812-9260 to schedule your free measured survey.
Sunrise’s housing stock, built rapidly from the mid-1960s through the early 1980s, presents a specific challenge: original aluminum-frame jalousie and single-pane sliding windows dominate neighborhoods like Sunrise Lakes, and none of it meets current High Velocity Hurricane Zone standards. Our crews replace these openings with code-compliant products that carry Miami-Dade NOA or Florida Product Approval, documented with a photo record under the Haven Standard. Window Installation is our most called-for service here, followed closely by impact-rated door systems.
Why Sunrise Homes Are Different
Sunrise sits roughly 12-15 miles inland, but Broward County’s HVHZ designation means design wind speeds match coastal requirements. Every permitted window and door replacement must carry a Miami-Dade Notice of Acceptance or Florida Product Approval. The city’s dense concentration of 1970s-1980s CBS homes and large-scale condo communities like Sunrise Lakes are filled with original single-pane aluminum-frame windows that predate modern hurricane codes. Non-impact glass is simply not an option for any permitted job.
The South Florida climate compounds the problem. Relentless UV, sustained heat, and high humidity degrade aluminum frames, glazing seals, and door weatherstripping faster than virtually anywhere in the continental US. Seal failure and frame warping are chronic repeat-service issues in the older housing stock. Contractors working Sunrise Lakes and similar HOA-governed condo phases face a double compliance hurdle: a window must first pass HVHZ product approval, then clear the association’s architectural review for frame color, profile depth, and sightline uniformity. This permit-plus-HOA sequencing routinely blindsides out-of-area companies and adds weeks to project timelines. We coordinate both tracks from our Miami office, with crews serving Sunrise locally.
Our Main Sunrise Services
Most Sunrise homeowners who call us start with one of these three projects.
Window Replacement in Sunrise
We replace original aluminum-frame jalousie and single-pane sliders in Sunrise Lakes, Welleby, and throughout the city’s 1970s-era CBS stock with HVHZ-compliant impact or energy-efficient windows. Every job begins with a measured survey you keep, and the written quote cannot differ from that document. We coordinate permits with the city and architectural review with your HOA when required. Window Replacement in Sunrise covers full-frame and retrofit installations across all eight manufacturer lines.
Impact Windows & Doors in Sunrise
Impact-rated products are legally mandated for any permitted replacement in Sunrise’s HVHZ zone. We specify laminated glass and reinforced frames from PGT, CGI, and CWS that carry Miami-Dade NOA, with U-factor and SHGC ratings documented for each opening. Condo associations in Sunrise Lakes and similar communities often require specific frame colors and sightline profiles; we verify HOA criteria before ordering. Impact Windows & Doors in Sunrise includes full permitting and inspection coordination.
Sliding & Patio Doors in Sunrise
Original sliding glass doors in Sunrise’s older homes suffer from corroded rollers, failed weatherstripping, and single-pane glass that leaks conditioned air and fails code. We measure the rough opening, specify impact-rated or energy-efficient replacement units from ES Windows or ECO Window Systems, and handle the permit and HOA approval sequence. Sliding & Patio Doors in Sunrise includes disposal of the old unit and a documented photo record of the completed installation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Sunrise
Window installation in Sunrise means working with 1970s-1980s CBS construction where original aluminum-frame jalousie and single-pane sliders are decades past rated lifespan and wholly non-compliant with current HVHZ impact standards. The relentless South Florida UV and humidity have degraded seals and warped frames, making full replacement the only viable path for most homeowners. We install from eight verified manufacturer lines, matching the product to the opening’s performance requirements and your HOA’s sightline and color criteria.
Single & Double Hung Windows
Signs you need it
Your sashes no longer stay open, the balance system is broken, or you feel air movement around the frame perimeter during a blower door test.
What it costs in Sunrise
Single and double hung window installation in Sunrise typically ranges $750-$1,400 per opening for vinyl impact-rated units, with aluminum-clad wood or composite frames running $1,200-$2,200.
How we do it
We measure the existing rough opening and sash pocket, remove the old unit, install the new hung window with integrated flashing, seal with low-expansion foam and backer rod, then finish with interior trim matched to your existing sightline.
Horizontal Roller Windows
Signs you need it
The sash rolls unevenly, the track is corroded from humidity exposure, or the single-pane glass shows condensation between failed seals.
What it costs in Sunrise
Horizontal roller window installation in Sunrise typically ranges $680-$1,250 per opening for standard sizes, with oversized units or custom frame colors adding 15-30 percent.
How we do it
We verify the structural integrity of the existing sill and header, remove the old roller assembly and sash, install the new unit with stainless steel rollers and impact-rated laminated glass, then test operation and document with photos.
What Window Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Single hung vinyl impact window | $750-$1,400 |
| Double hung composite frame | $1,200-$2,200 |
| Horizontal roller, standard size | $680-$1,250 |
Do you pull permits for window installation in Sunrise?
Yes. Every window installation in Sunrise requires a building permit because Broward County’s HVHZ designation mandates Miami-Dade NOA or Florida Product Approval for all replacements. We pull the permit, schedule inspection, and provide the passed documentation for your records. Call (754) 812-9260 to schedule your free measured survey.
Will my HOA approve the windows you install?
We verify your association’s architectural criteria, including frame color, profile depth, and sightline uniformity, before specifying any product. Sunrise Lakes and similar large HOA communities require this sequencing; we handle both permit and HOA approval tracks. Call (754) 812-9260 for a written quote that includes your HOA’s requirements.
Door Installation in Sunrise
Door installation in Sunrise requires HVHZ-rated impact products for every permitted replacement, with original 1970s-1980s entry systems typically featuring hollow-core or uninsulated metal slabs that fail current wind-load and energy codes. The humid climate has rusted frames and rotted thresholds, while single-pane sidelites and transoms leak conditioned air and offer no impact protection. We specify and install from Therma-Tru and other verified lines, with a written price before any work starts. Door Installation includes full permitting and HOA coordination.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your entry door shows rust at the frame corners, the threshold is spongy from moisture intrusion, or the sidelite glass lacks a Miami-Dade NOA label.
What it costs in Sunrise
Hurricane-proof front door installation in Sunrise typically ranges $1,800-$4,500 including frame, impact-rated slab, hardware, and sidelite options, with fiberglass units at the lower end and steel or custom wood at the upper.
How we do it
We measure the rough opening and jamb depth, remove the old unit including sidelites and transom, install the new impact-rated pre-hung door with integrated threshold pan, seal with backer rod and sealant, then test latching and document with photos.
French & Double Doors
Signs you need it
The astragal is warped and no longer seals, the multipoint lock is inoperative, or the single-pane glass shows seal failure with fogging between panes.
What it costs in Sunrise
French and double door installation in Sunrise typically ranges $2,200-$5,800 per pair depending on frame material, glass specification, and whether the opening requires structural header modification.
How we do it
We verify header capacity for the wider opening, remove the old doors and track or threshold, install the new impact-rated pair with adjustable hinges and multipoint locking, align the astragal for uniform seal compression, then test operation and document.
What Door Installation Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Hurricane-proof entry door with sidelites | $1,800-$4,500 |
| French/double door pair | $2,200-$5,800 |
| Standard replacement exterior door | $950-$1,800 |
Do I need a permit to replace my front door in Sunrise?
Yes. Any exterior door replacement in Sunrise’s HVHZ zone requires a building permit and must use a product with Miami-Dade NOA or Florida Product Approval. We pull the permit, coordinate inspection, and provide passed documentation. Call (754) 812-9260 for a free estimate.
Can you match my HOA’s required door style?
We verify your association’s architectural criteria before specifying any product, including panel profile, glass pattern, and finish color. Therma-Tru and other lines offer extensive customization for Sunrise Lakes and similar HOA communities. Call (754) 812-9260 to review your HOA documents.
Energy-Efficient Windows in Sunrise
Energy-efficient window installation in Sunrise addresses the specific penalty of single-pane aluminum-frame originals: summer attic temperatures exceed 140°F, and uninsulated glass conducts that heat directly into living spaces, forcing HVAC systems to run continuously. The combination of HVHZ impact requirements and South Florida’s cooling-dominated climate makes Low-E coatings, argon gas fill, and proper U-factor specification essential, not optional. We measure each opening’s solar heat gain coefficient needs and specify from ES Windows and ECO Window Systems. Energy-Efficient Windows includes performance documentation for every unit.
Low-E & Argon Gas Glass
Signs you need it
Your west- and south-facing rooms are uncomfortably hot by mid-afternoon, your HVAC runs more than 12 hours daily in summer, or your single-pane glass shows no Low-E coating when checked with a flame reflection test.
What it costs in Sunrise
Low-E and argon gas window installation in Sunrise typically adds $80-$150 per opening over standard impact glass, with payback periods of 4-7 years depending on HVAC efficiency and home orientation.
How we do it
We calculate each opening’s solar heat gain coefficient requirement based on orientation and shading, specify the appropriate Low-E coating and argon fill from our manufacturer lines, install with warm-edge spacers to prevent seal failure, then document U-factor and SHGC ratings.
ENERGY STAR Replacement Windows
Signs you need it
Your current windows were manufactured before 2010, you have no NFRC label data, or your summer electric bills exceed $300 monthly for a 1,500-square-foot home.
What it costs in Sunrise
ENERGY STAR replacement window installation in Sunrise typically ranges $850-$1,600 per opening for vinyl impact-rated units meeting the South climate zone criteria, with composite frames running $1,400-$2,400.
How we do it
We verify your home meets ENERGY STAR South zone requirements, specify products with NFRC-certified U-factor below 0.40 and SHGC below 0.25, install with proper flashing and air sealing, then provide the certification documentation for utility rebate applications.
What Energy-Efficient Windows Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Low-E/argon upgrade per opening | $80-$150 add-on |
| ENERGY STAR vinyl impact window | $850-$1,600 |
| ENERGY STAR composite frame | $1,400-$2,400 |
Will energy-efficient windows lower my electric bill in Sunrise?
Most Sunrise homeowners see summer cooling reductions of 15-25 percent after replacing single-pane aluminum windows with Low-E impact-rated units, with actual savings depending on home orientation, shading, and HVAC efficiency. We document before-and-after performance estimates in your written quote. Call (754) 812-9260 for a free measured survey.
Do energy-efficient windows still meet hurricane codes?
Yes. Every energy-efficient window we install in Sunrise carries Miami-Dade NOA or Florida Product Approval as required by HVHZ code; Low-E coating and argon fill are added to impact-rated laminated glass, not substituted for it. Call (754) 812-9260 to review specifications.
Impact Garage Doors in Sunrise
Impact garage door installation in Sunrise is governed by the same HVHZ requirements as windows and entry doors, yet many 1970s-1980s homes still have non-rated steel or wood panel doors that become lethal projectiles in design wind events. The large surface area of a garage door creates extreme wind-load concentration, and original track systems are often corroded from humidity exposure, making structural failure a real risk. We specify wind-load-rated doors from verified manufacturers and handle the permit and inspection sequence. Impact Garage Doors includes full documentation.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker or Miami-Dade NOA label, the panels show rust or delamination, or the track system wobbles during normal operation.
What it costs in Sunrise
Hurricane-rated garage door installation in Sunrise typically ranges $1,400-$3,200 for a standard two-car opening, with insulated impact-rated models running $2,200-$4,500 depending on panel style and window insert options.
How we do it
We measure the opening and calculate required wind-load rating based on exposure and structure height, remove the old door and track, install the new impact-rated sectional door with reinforced track and heavy-duty spring system, test auto-reverse and wind-load resistance, then document with photos.
Wind-Load Code Compliance
Signs you need it
Your permit application was rejected for insufficient garage door documentation, your insurance renewal requires HVHZ compliance, or you’re selling and the buyer’s inspection flagged the garage door.
What it costs in Sunrise
Wind-load code compliance verification and garage door replacement in Sunrise typically ranges $1,600-$3,800 including engineering letter, permit, inspection, and installation of a code-compliant door.
How we do it
We engage a Florida-licensed engineer to specify the required wind-load rating, pull the permit, install the NOA-documented door with proper track anchorage to the CBS wall, schedule and pass inspection, then provide the completed permit package for your records.
What Impact Garage Doors Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Hurricane-rated garage door, standard | $1,400-$3,200 |
| Insulated impact-rated model | $2,200-$4,500 |
| Wind-load compliance with engineering | $1,600-$3,800 |
Does my garage door need to be impact-rated in Sunrise?
Yes. Broward County’s HVHZ designation requires Miami-Dade NOA or Florida Product Approval for all garage doors, and the large surface area creates extreme wind-load exposure. We specify and install code-compliant doors with proper track anchorage. Call (754) 812-9260 for a free estimate.
Can you work with my HOA’s garage door color requirements?
We verify your association’s architectural criteria before specifying any product, including panel profile, window insert pattern, and finish color. Sunrise Lakes and similar communities often require specific sightline uniformity across multiple units. Call (754) 812-9260 to review your HOA documents.
Custom & Geometric Windows in Sunrise
Custom and geometric window installation in Sunrise solves the specific problem of non-rectangular openings in 1970s-1980s architecture, where arched transoms, circular accent windows, and angled corner units were common design features but are now filled with single-pane glass that fails code and leaks energy. HOA communities like Sunrise Lakes particularly value sightline uniformity, making custom replication of original profiles essential for approval. We template each opening in the field and fabricate from PGT, CGI, and other verified lines. Custom & Geometric Windows includes full templating and documentation.
Geometric & Shaped Windows
Signs you need it
Your triangular, trapezoid, or octagonal window shows seal failure, the original single-pane glass has no impact rating, or your HOA requires profile-matched replacement to maintain façade consistency.
What it costs in Sunrise
Geometric and shaped window installation in Sunrise typically ranges $1,200-$3,500 per opening depending on complexity, with multi-sided units or those requiring curved glass at the upper end.
How we do it
We create a field template of the existing opening, digitize the profile for CNC fabrication, specify impact-rated laminated glass cut to the custom shape, install with integrated flashing matched to the surrounding wall plane, then verify seal integrity and document with photos.
Arched & Curved Windows
Signs you need it
The arched transom above your entry or Palladian window shows condensation between failed panes, the radius does not match any standard replacement, or the original aluminum frame has warped from heat exposure.
What it costs in Sunrise
Arched and curved window installation in Sunrise typically ranges $1,800-$4,200 per opening, with true radius construction costing more than sprung-arch adaptations due to specialized glass tempering requirements.
How we do it
We measure the spring line, rise, and radius in the field, verify structural support for the curved header, fabricate the arched unit with impact-rated glass bent or cut to the measured profile, install with custom jamb extensions, then verify operation of any venting function and document.
What Custom & Geometric Windows Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Geometric/shaped window | $1,200-$3,500 |
| Arched/curved window | $1,800-$4,200 |
| Oversized custom opening | $2,500-$5,500 |
How long does custom window fabrication take?
Custom and geometric windows typically require 6-10 weeks from field template to delivery, with arched or curved units at the longer end due to specialized glass processing. We template early in the permit process so fabrication and approval run in parallel. Call (754) 812-9260 to schedule templating.
Will my HOA approve custom window shapes?
We verify your association’s architectural criteria before templating any custom shape, including profile depth, sightline, and finish color requirements. Sunrise Lakes and similar communities often require submission of product drawings and finish samples. Call (754) 812-9260 to review your HOA documents.
Brands We Service in Sunrise
We install from eight verified manufacturer lines in Sunrise: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Common hardware, weatherstripping, and glazing components are stocked locally through our Miami office, with most replacement parts available within 48 hours. Our brands are specified by what your opening requires, not by what is in stock.
Pricing for Windows & Doors in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Single hung vinyl impact window | $750-$1,400 |
| Double hung composite frame | $1,200-$2,200 |
| Horizontal roller window | $680-$1,250 |
| Hurricane-proof entry door with sidelites | $1,800-$4,500 |
| French/double door pair | $2,200-$5,800 |
| ENERGY STAR vinyl impact window | $850-$1,600 |
| Low-E/argon upgrade per opening | $80-$150 add-on |
| Hurricane-rated garage door | $1,400-$3,200 |
| Insulated impact garage door | $2,200-$4,500 |
| Geometric/shaped window | $1,200-$3,500 |
| Arched/curved window | $1,800-$4,200 |
Prices in Sunrise push toward the higher end when HOA architectural review requires custom colors or profiles, when existing openings need structural modification for HVHZ compliance, or when 1970s-era CBS construction reveals deteriorated framing that must be rebuilt before new units can be anchored. The written quote you receive after our measured survey is the final invoice; Haven Clause 1 means no surprises.
Neighborhoods We Serve in Sunrise
Our crews work throughout Sunrise, from the large HOA communities to smaller single-family enclaves. Scheduling and dispatch are coordinated from our Miami office, with typical response time of one business day for measured surveys across the city.
- Sunrise Lakes
- Welleby
- Sawgrass Estates
- Sunrise Golf Village
- Plantation Acres (Sunrise border)
Service Area - Cities Near Sunrise
We install windows and doors across Broward County and adjacent areas, with crews serving Weston, FL, Southwest Ranches, FL, Pembroke Pines, FL, and Davie, FL from the same Miami-based dispatch. Each city has its own permit requirements and HOA landscapes; we verify local conditions before quoting.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Sunrise
Permit review for window and door replacement in Sunrise typically takes 5-10 business days for standard HVHZ-compliant products, with an additional 2-4 weeks if HOA architectural review is required first. We sequence both tracks to avoid delays. Call (754) 812-9260 to schedule your project.
Yes. We regularly install in Sunrise Lakes and similar large HOA-governed communities, coordinating with association managers on architectural criteria, scheduling access, and sightline uniformity requirements. The Haven Standard’s documented photo record is particularly valued in these communities for board review.
Jalousie windows are common in Sunrise’s 1960s-1970s stock and cannot be upgraded to meet HVHZ impact standards; full replacement with code-compliant horizontal rollers, single hung, or casement units is required for any permitted job. We measure the rough opening and specify the appropriate replacement style. Call (754) 812-9260 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.