Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Tamarac, FL
Window installation in Tamarac typically runs $650-$1,400 per opening for standard vinyl or aluminum replacement units, with impact-rated products starting around $1,100 per opening due to Broward County’s High Velocity Hurricane Zone requirements. Most complete home retrofits in Tamarac’s 1960s-1980s CBS housing stock require sill modifications or buck framing because original rough openings were sized for thin-profile aluminum jalousie and single-track sliders. We measure every opening to the sixteenth, write the price before any work starts, and leave a documented photo record under the Haven Standard. Call (754) 812-9260 to schedule your free measured survey.
Why Tamarac Homes Are Different
Tamarac was built almost entirely during the 1963-1985 retirement-community boom, leaving a dense concentration of CBS homes fitted with original jalousie, awning, and single-track aluminum sliding windows that are non-compliant with today’s High Velocity Hurricane Zone (HVHZ) standards - the same stringent designation that governs all of Broward County. Every window or door replacement in Tamarac must carry a Miami-Dade NOA or Florida statewide Product Approval and be permitted through Broward County Building Division, a compliance threshold that does not apply just across the county line in Palm Beach County and that makes product selection and permitting expertise the true differentiator for local contractors.
The city’s residential stock is dominated by concrete block single-family homes and low-rise condos built between the mid-1960s and mid-1980s as part of planned age-restricted communities, most of which retain original aluminum-frame jalousie or single-pane sliding windows in standard openings that were never designed for impact-rated glazing. Retrofitting these openings to accept modern impact units often requires buck framing or sill modifications because original rough openings were sized for the thinner profiles of mid-century aluminum products.
Although Tamarac sits roughly 12 miles inland from the Atlantic, Broward County’s HVHZ designation means every replacement window and door must meet the same hurricane-impact engineering standards required in beachfront communities, and the city’s dense canal grid keeps ambient humidity elevated year-round, accelerating corrosion on aluminum frames and degrading weatherstripping and glazing seals on older sliding glass doors faster than in drier inland markets.
Many of Tamarac’s HOA-governed communities - particularly the older Kings Point-style associations - require architectural review board approval for exterior changes before a Broward County permit can be issued, so contractors who show up only with the county permit package, without helping the homeowner navigate the HOA’s separate color and style approval process first, routinely cause project delays that frustrate senior residents and generate negative reviews.
Our Main Tamarac Services
These are the two services Tamarac homeowners call about most, plus sliding and patio door systems for homes opening onto lanais and canal-facing patios.
Window Replacement in Tamarac
We replace original jalousie, awning, and single-track aluminum sliders with modern impact-rated or energy-efficient units sized to Tamarac’s existing CBS rough openings. Most jobs require buck framing or sill modification because 1970s openings were built for thin profiles, not today’s laminated glass assemblies. We handle the Broward County permit and, when needed, the HOA architectural review package. Window Replacement in Tamarac covers full-home retrofits and selective replacement.
Impact Windows & Doors in Tamarac
Every impact product we install in Tamarac carries a current Miami-Dade NOA or Florida Product Approval, the minimum legal standard under Broward County’s HVHZ rules. We specify laminated glass thickness, frame depth, and anchorage pattern to the opening’s actual condition, not a catalog default. The measured survey documents frame readings, sightline measurements, and product specs; the written quote cannot differ from that document. Impact Windows & Doors in Tamarac details our full impact-rated line.
Sliding & Patio Doors in Tamarac
Tamarac’s canal-facing homes and lanai enclosures depend on sliding glass doors that have endured decades of humidity-driven track corrosion and seal degradation. We replace these with multi-point lock, impact-rated sliding systems from PGT, CGI, and CWS, specifying sill pan flashing and drainage to the slab condition we find. Sliding & Patio Doors in Tamarac covers standard and oversized openings.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Tamarac
Window installation in Tamarac means retrofitting 1960s-1980s CBS openings that were never engineered for impact-rated glazing or modern thermal breaks. The original aluminum jalousie and single-track sliders in neighborhoods like Kings Point and Woodlands sit in rough openings too shallow for today’s laminated glass assemblies, so we regularly field-measure buck frame depth, sill slope, and header condition before specifying product. Window Installation covers our full methodology across all opening types.
Single & Double Hung Windows
Signs you need it
Your original aluminum single hung won’t stay open, the balance shoe is broken, or you feel air movement at the meeting rail even when latched.
What it costs in Tamarac
Vinyl single hung installation in Tamarac typically runs $650-$950 per opening; impact-rated aluminum double hung units range $1,100-$1,650 depending on laminated glass thickness and frame depth required for HVHZ compliance.
How we do it
We remove the sash and frame, inspect the rough opening for rot or settlement cracks common in 1970s CBS, install buck framing if the original sill is too shallow, flash the sill pan to the slab, square and level the new unit, then foam, cap, and seal per the manufacturer’s NOA.
Horizontal Roller Windows
Signs you need it
The sash drags in the track, the rollers have flat-spotted, or the locking mechanism no longer engages because the frame has sagged from humidity-corroded fasteners.
What it costs in Tamarac
Standard horizontal roller replacement in Tamarac ranges $750-$1,100 per opening; impact-rated rollers with laminated glass and reinforced interlock run $1,200-$1,800 depending on opening width and HVHZ anchorage requirements.
How we do it
We pull the old sash and track, check the header for deflection common in wide 1960s openings, install the new track level with proper slope to the weep holes, set the sash with correct end-play, and adjust the roller carriage so the lock engages without forcing.
What Window Installation Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Vinyl single hung window | $650 - $950 |
| Impact-rated double hung window | $1,100 - $1,650 |
| Horizontal roller window (impact-rated) | $1,200 - $1,800 |
How long does window installation take in Tamarac?
Most single openings complete in one day; full-home retrofits in Tamarac’s 1,200-1,800 square foot CBS homes typically run 2-4 days depending on how many openings require buck framing or sill modification. We schedule Broward County inspection before we leave the site. Call (754) 812-9260 for an exact timeline - estimates are free.
Do you handle HOA approval for window replacement in Tamarac?
Yes - we prepare the color, style, and material package most Kings Point-style associations require before they’ll sign off on exterior changes, then sequence the Broward County permit application behind that approval so neither step delays the other. Call (754) 812-9260 to review your HOA’s specific requirements.
Door Installation in Tamarac
Door installation in Tamarac means replacing original 1970s hollow-core or thin-gauge steel entry doors and corroded aluminum sliding patio units with products that meet HVHZ impact standards and pass Broward County inspection. The humid canal environment has degraded thresholds, jambs, and weatherstripping on most original doors past the point of weatherseal recovery, and many entry door rough openings in Tamarac’s CBS stock lack the depth for modern multi-point lock systems without frame extension. Door Installation covers our measured survey process for all door types.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your front door leaks air at the threshold, the jamb is soft at the sill from humidity wicking, or the deadbolt no longer seats because the frame has shifted in the CBS wall.
What it costs in Tamarac
Impact-rated fiberglass entry door systems in Tamarac range $2,200-$4,500 installed, including HVHZ-compliant frame, laminated glass sidelite if present, and multi-point lock hardware; steel impact units with decorative glass inserts run $3,500-$6,000.
How we do it
We remove the old unit and inspect the CBS rough opening for moisture intrusion at the sill, install a composite or aluminum frame extension if needed for lock hardware depth, set the pre-hung unit plumb and square, shim at hinge locations, foam the gap, and install the multi-point lock per the manufacturer’s NOA.
French & Double Doors
Signs you need it
The active door sags and drags the threshold, the astragal seal is compressed flat, or you can see daylight at the meeting stile when both doors are closed.
What it costs in Tamarac
Impact-rated aluminum French door pairs in Tamarac typically run $3,800-$6,500 depending on width, glass specification, and whether the existing header requires reinforcement for the heavier laminated glass assembly.
How we do it
We verify header capacity for the increased dead load of laminated glass, remove the old frame without damaging interior drywall common in 1970s construction, install the new frame with proper sill pan drainage to the exterior slab, hang both doors with consistent margin, and adjust the multi-point and flush bolt hardware until the astragal seals evenly.
What Door Installation Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Impact-rated fiberglass entry door | $2,200 - $4,500 |
| Impact-rated steel entry door with glass | $3,500 - $6,000 |
| Impact-rated French door pair | $3,800 - $6,500 |
Do you pull permits for door replacement in Tamarac?
Yes - every door replacement in Tamarac requires a Broward County permit because HVHZ compliance must be verified by inspection; we submit the application, schedule inspections, and do not start work until the permit is in hand. Call (754) 812-9260 to confirm your project’s permit path.
Can you match my HOA’s color requirements for a new front door?
We specify entry door finishes from manufacturer color decks that most Tamarac HOAs accept, and we include the color sample and material data sheet in the architectural review package we prepare for your board. Call (754) 812-9260 to review your association’s specific requirements.
Energy-Efficient Windows in Tamarac
Energy-efficient windows in Tamarac address the specific thermal failure pattern of 1960s-1980s single-pane aluminum units: solar heat gain that overwhelms aging HVAC systems, and conductive frames that sweat in the humid canal environment. We specify replacement windows by U-factor and SHGC to the orientation of each opening, not by a house-wide default, because east-facing units in Tamarac’s dense housing see different loads than west-facing canal views. Energy-Efficient Windows details our performance-based specification method.
Low-E & Argon Gas Glass
Signs you need it
Your east or west-facing rooms overheat by mid-morning, your aluminum frames conduct heat you can feel from three feet away, or your energy bills spike May through October despite unchanged thermostat settings.
What it costs in Tamarac
Low-E coated, argon-filled double-pane replacement windows in Tamarac range $750-$1,150 per opening; upgrading to triple silver Low-E with krypton in large fixed units runs $1,400-$2,100 depending on size and frame material.
How we do it
We measure each opening’s solar exposure with a site compass and shade map, specify Low-E coating by surface number per orientation, fill with argon to 90% concentration, and verify the spacer is warm-edge silicone not conductive aluminum.
ENERGY STAR Replacement Windows
Signs you need it
Your current windows carry no performance label, your cooling costs exceed $0.14 per square foot of conditioned space monthly, or you’re replacing HVAC and want to reduce the load rather than oversize the new system.
What it costs in Tamarac
ENERGY STAR certified vinyl replacement windows in Tamarac typically run $850-$1,350 per opening; premium composite frame units with enhanced glazing packages range $1,500-$2,300 for large openings requiring HVHZ-rated construction.
How we do it
We verify the product’s NFRC label U-factor and SHGC against the specific climate zone requirements for South Florida, confirm the window is listed in the current ENERGY STAR product directory, and document both on the measured survey you keep.
What Energy-Efficient Windows Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Low-E/argon double-pane replacement | $750 - $1,150 |
| Triple silver Low-E with krypton | $1,400 - $2,100 |
| ENERGY STAR vinyl replacement window | $850 - $1,350 |
Will energy-efficient windows lower my cooling bill in Tamarac?
Most Tamarac homeowners see 12-18% cooling cost reduction after replacing single-pane aluminum units with Low-E, argon-filled replacements, though actual savings depend on duct condition, insulation, and thermostat behavior. Call (754) 812-9260 for a load calculation with your estimate.
Do energy-efficient windows still meet hurricane codes in Tamarac?
Yes - we specify ENERGY STAR products from manufacturers who also carry Miami-Dade NOAs for impact-rated construction, so thermal performance and HVHZ compliance are the same unit, not a trade-off. Call (754) 812-9260 to review the specific product lines that meet both standards.
Impact Garage Doors in Tamarac
Impact garage doors in Tamarac protect a large, often unconditioned opening that original 1970s construction left with thin, non-reinforced panels and no wind-load anchorage. The HVHZ requirement applies equally to garage doors as to windows, yet many Tamarac homes still carry original doors that would fail a pressure test; we replace these with wind-rated sectional or roll-up systems engineered to the specific opening width and local wind speed. Impact Garage Doors covers our full wind-load specification process.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door has no wind-load sticker, the track is fastened with lag screws into 1970s block not embedded struts, or the panels rattle in ordinary thunderstorms.
What it costs in Tamarac
Impact-rated sectional garage doors in Tamarac range $2,800-$5,500 for a standard two-car opening, including wind-rated track, heavy-duty hinges, and HVHZ-compliant anchorage; oversized or custom-panel designs run $5,000-$8,500.
How we do it
We measure the opening width and headroom, calculate the design wind pressure per ASCE 7 for Tamarac’s exposure category, specify the door and track system to that load, install vertical and horizontal reinforcement as required by the NOA, and connect to the structure with embedded fasteners not surface-mounted lags.
Wind-Load Code Compliance
Signs you need it
Your homeowner’s insurance requires a wind mitigation inspection, the inspector flagged the garage door as non-compliant, or you’re selling and the buyer’s lender requires HVHZ documentation for all openings.
What it costs in Tamarac
Wind-load retrofit of an existing garage door in Tamarac with approved reinforcement kit and track upgrade typically runs $1,800-$3,200; full replacement with new impact-rated door and automatic opener ranges $3,500-$6,500.
How we do it
We inspect the existing door for NOA eligibility, install the manufacturer’s specific reinforcement package if the door is listed, upgrade track and spring hardware to match, and provide the documentation your wind mitigation inspector or closing attorney requires.
What Impact Garage Doors Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Impact-rated sectional garage door (2-car) | $2,800 - $5,500 |
| Oversized/custom impact garage door | $5,000 - $8,500 |
| Wind-load retrofit with reinforcement kit | $1,800 - $3,200 |
Does my garage door need to be impact-rated if it’s not facing the street?
Yes - Broward County’s HVHZ rules apply to all garage doors regardless of orientation; wind-borne debris and pressure differentials don’t discriminate by facade, and inspectors check every opening. Call (754) 812-9260 to verify your door’s compliance status.
Can I keep my garage door opener with a new impact-rated door?
Most standard openers can be reinstalled if the new door’s weight and spring balance fall within the opener’s rated capacity; we verify this during measurement and recommend opener upgrade if the heavier laminated door requires it. Call (754) 812-9260 to check your specific combination.
Custom & Geometric Windows in Tamarac
Custom and geometric windows in Tamarac solve the problem of 1970s-era architectural features - octagonal front windows, arched transoms, triangular gable vents - that original builders fitted with single-pane glass in thin aluminum frames now failing at every seal. These openings were never standardized, so replacement requires field-measured templates, not catalog sizes; we document the exact radius, chord, or angle on the measured survey you keep, then specify the custom unit to that geometry. Custom & Geometric Windows covers our template and fabrication process.
Geometric & Shaped Windows
Signs you need it
Your triangular or trapezoidal window leaks at the mitered corners, the single-pane glass sweats in humid weather, or you’ve caulked the same seam three times and it still opens.
What it costs in Tamarac
Custom geometric replacement windows in Tamarac range $1,800-$3,500 per opening depending on complexity, with trapezoids and octagons at the lower end and compound curves at the upper; impact-rated laminated glass adds 35-50% to base cost.
How we do it
We build a full-scale template from the existing opening, measure every angle to the degree and every radius to the quarter-inch, transmit the template to the manufacturer for CNC fabrication, and verify the unit against the template before installation.
Arched & Curved Windows
Signs you need it
The radius window over your front door has separated at the springline, the curved glass is fogged from failed sealant, or the aluminum frame has oxidized through its anodized layer from decades of canal humidity.
What it costs in Tamarac
True radius arched windows in Tamarac typically run $2,500-$5,000 per opening for standard heights; segmented arch or elliptical designs with impact-rated laminated glass range $3,500-$7,500 depending on span and frame depth required for HVHZ anchorage.
How we do it
We measure the rise and chord of the existing arch, determine whether the original is a true radius or segmented approximation, specify the replacement to match the sightline from interior and exterior, and install with curved sill pan flashing that drains to the rough opening.
What Custom & Geometric Windows Costs in Tamarac
| Item | Typical range in Tamarac |
|---|---|
| Custom geometric window (trapezoid/octagon) | $1,800 - $3,500 |
| Impact-rated geometric window | $2,400 - $5,200 |
| True radius arched window | $2,500 - $5,000 |
How long does custom window fabrication take for Tamarac homes?
Most custom geometric and arched windows require 6-10 weeks from template approval to delivery; we schedule the Broward County permit application during fabrication so inspection can proceed immediately after installation. Call (754) 812-9260 to coordinate template measurement with your project timeline.
Can you match the original sightline of my 1970s arched window?
We document the existing sightline - the visible glass area from interior and exterior - on the measured survey, then specify the replacement frame depth and glazing stop position to replicate or improve that proportion without changing the rough opening. Call (754) 812-9260 to review your specific arch geometry.
Brands We Service in Tamarac
We install and service eight manufacturer lines in Tamarac - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by performance tier and price range, not by margin. We stock common hardware, rollers, and weatherstripping for CWS, ES Windows, and ECO Window Systems locally, so most service calls don’t wait on parts. Our brands page lists full product ranges and NOA status.
Pricing for Windows & Doors in Tamarac, FL
| Service | Typical range in Tamarac |
|---|---|
| Vinyl single hung window | $650 - $950 |
| Impact-rated double hung window | $1,100 - $1,650 |
| Horizontal roller window (impact-rated) | $1,200 - $1,800 |
| Impact-rated fiberglass entry door | $2,200 - $4,500 |
| Impact-rated steel entry door with glass | $3,500 - $6,000 |
| Impact-rated French door pair | $3,800 - $6,500 |
| Low-E/argon double-pane replacement | $750 - $1,150 |
| ENERGY STAR vinyl replacement window | $850 - $1,350 |
| Impact-rated sectional garage door (2-car) | $2,800 - $5,500 |
| Wind-load retrofit with reinforcement kit | $1,800 - $3,200 |
| Custom geometric window (trapezoid/octagon) | $1,800 - $3,500 |
| True radius arched window | $2,500 - $5,000 |
Prices in Tamarac push toward the higher end when openings require buck framing, sill modification, or HOA architectural review coordination; every quote we write includes these contingencies as line items, not surprises. The measured survey you receive before work starts is the same document as your final invoice - Haven Clause 1, in writing.
Neighborhoods We Serve in Tamarac
We measure, specify, and install across Tamarac’s full residential footprint, from the original 1960s planned communities to newer infill. Crews dispatch from our Miami office and typically schedule Tamarac surveys within two business days of contact.
- Kings Point
- Woodlands
- Westwood Community
- Tamarac Lakes
- Mainlands of Tamarac
Service Area - Cities Near Tamarac
We serve homeowners throughout central and western Broward County, with crews regularly in Weston, FL, Southwest Ranches, FL, Pembroke Pines, FL, and Davie, FL for window and door installation, replacement, and repair under the same Haven Standard that governs every job.
Serving Tamarac, FL - Our Local Coverage Area
We’re based in the Tamarac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Tamarac
We answer calls live 24/7 and typically schedule measured surveys in Tamarac within two business days; installation timelines depend on product availability and Broward County permit processing, which we handle as part of every engagement. Dispatch and scheduling are coordinated from our Miami office with crews serving Tamarac locally.
Many Tamarac HOAs, particularly in Kings Point-style associations, require architectural review board approval before exterior changes; we prepare the color, style, and material package for your board and sequence the county permit behind that approval to prevent delays.
Broward County’s HVHZ designation requires Miami-Dade NOA or Florida Product Approval for every replacement window and door, with inspection verifying proper anchorage and glazing; this standard does not apply just across the county line in Palm Beach County, making product expertise and permitting experience critical for Tamarac contractors.
Call (754) 812-9260 to schedule your free measured survey. We’ll write the price before any work starts, leave a documented photo record when the job is done, and stand behind it with the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tamarac Customers Say
"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.